IN 1986 Toyota Corolla GT-S Coupe (Black) 2nd owner 13X,000 miles

[paradoxRPS13]

I am doing it guys, for real. I am selling my 1986 GT-S Coupe. I have had it for about 6 years and I got it with 113K miles on it. I have put 20 to 30K miles on it and have decided to cut back on cars a lot. I will give details below. Located in Richmond, IN 47374. I am 45 minutes from Dayton and 1 hour and 15 minutes from downtown Cincy.

I am the 2nd owner, bought it in Fairfield about 6 years ago, the original owner gave it to their daughter and son in law and I bought from them, the title was never even changed over to them, actually they lived in the daughters' parents house too...

1986 Toyota Corolla GT-S coupe.
Black original paint
CF drop vent hood (damaged, sort of repaired and it closes and does not rattle too bad)
BRAND new Ghetto zone clutch kit
Rebuilt engine with 2k miles on it, maybe. It was in my son's car and we pulled it to drop something else in it (another 4ag with milled head and valve work)
All stock engine rebuild, machine work done at KOI in Fairfield and assembled by Derrick from Outbrake.
Factory LSD
I put this completely back to stock except for jubiride copy overfenders (Since the fenders needed to be cut to fit the wheels in the pics (which DO NOT come with the car)
It has a 2DIN clairion head unit CD/Cass and I have a CD changer that was made for this unit, not FM. It is mounted to rear seat, so when seat is folded down you can access it.
It has decent exhaust, all stock
Tokiko blue rear shocks
Unknown front struts with coilover sleeves and unknown rates
I think it has newer brakes on it, and autozone altenator (lifetime).
It does not smoke or make weird noises.

I am still connecting vacuum lines, I should have them connected and have it all sorted out tomorrow. I removed all smog stuff before and reinstalled it.
I hate to sell it, but my son has it's twin and I can drive it to get my AE86 fix, so no need for duplicating...

I am asking $3500 for it OBO. I will consider trades for tools/car stuff/etc, but cash is king. I will even trade for a car, but it has to really interest me...

It DOES NOT come with TRD wing and DOES NOT come with my 14x9 -7 offset SSR MK III wheels...

Here are a few pics, there is rust on the rear panel below passenger tail light, on passenger c pillar near trunk, and behind drivers rear wheel and a bit behind passenger rear wheel, both behind bumper side pieces. It has surface rust where the fenders were cut for flares also, but it can be prepped and will be fine. Frame rails are in great shape.

I will take more pics tomorrow after assembling the center console and mounting ECU (Just finished Engine/tranny install recently)








More Pics














Rust areas






I can be reached at gfellman at gmail dot com and text/call seven6five 9nine3 four6six3