Fixed wiring mistake. oxygen sensor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

the3SecondJerk · 12-01-2003, 08:55 AM

I know it isa elementary to most of you but I made an error while wiring my SR20DET. There are 3 wires on the o2 sensor. The middle [white] wire is shielded, for grounding static electricity. You need to make sure the inner wire is completely seperate from the outer shielding [ground]. I had 1 little stand touching and it caused a lot of headache.

My symptom:

Car was running Extremely rich.

I replaced nismo FPR, O2 sensor, and ECU all before redoing the wiring.

Hope this can help someone.

PS: There are other shielded wires like the o2 sensor one. I believe MAFS, and CAS Cam (crank) Angle Sensor are also shielded.

Dan

12-01-2003, 08:55 AM	#1
the3SecondJerk Zilvia Junkie Join Date: Jul 2002 Location: Fort Collins, CO Posts: 305 Trader Rating: (3) Feedback Score: 3 reviews	Fixed wiring mistake. oxygen sensor I know it isa elementary to most of you but I made an error while wiring my SR20DET. There are 3 wires on the o2 sensor. The middle [white] wire is shielded, for grounding static electricity. You need to make sure the inner wire is completely seperate from the outer shielding [ground]. I had 1 little stand touching and it caused a lot of headache. My symptom: Car was running Extremely rich. I replaced nismo FPR, O2 sensor, and ECU all before redoing the wiring. Hope this can help someone. PS: There are other shielded wires like the o2 sensor one. I believe MAFS, and CAS Cam (crank) Angle Sensor are also shielded. Dan __________________ Drive it like you stole it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode