wiring gurus quick question..

[paintkilz]

ok guys my harness had a short in it so I pulled it from the car. it previously shorted out my ecu and i noticed i could wiggle a couple wires and power to the ecu would become intermittent.



so once i pulled it, i started probing for continuity.

WELL i went through all the grounds on the ECU side of the harness. I could trace all sensor grounds and the few ECU grounds to the 2 grounding points on the head(f20 grounds).

that would be correct right?

i assume it is but this is where my question comes in. My ecu ground has no continuity with either of the 2 f20 grounds.

i assume i found my first short? or does it not ground there?

sorry if this is noobish. im trying to do all i can and find out whatever before i posted this.

thanks for your time guys