Oil cooler thermostat adaptor question. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JDMbyBlood · 01-28-2012, 07:04 PM

I have a Greddy remote oil filter relocation kit installed on my SR. Can I use this Oil cooler thermostat adapter between the remote adaptor and the oil filter to run a oil cooler?
Thanks....

Here is the description in the ad:
Attaches to block and your oil filter screws on to the adapter. Simplifies engine oil cooler installation. The thermostat directs oil to the cooler only when it is hot; starts at 160 degrees F and fully at 180!!! Oil goes thru the oil filter all the time. The adapter is 1 5/8" thick; connect with 1/2" ID hose; threads on fittings are 3/8" NPT X 1/2" ID hose barb.

01-28-2012, 07:04 PM	#1
JDMbyBlood Zilvia Junkie Join Date: Apr 2009 Location: Florida: Gods waiting room. Posts: 509 Trader Rating: (24) Feedback Score: 24 reviews	Oil cooler thermostat adaptor question. I have a Greddy remote oil filter relocation kit installed on my SR. Can I use this Oil cooler thermostat adapter between the remote adaptor and the oil filter to run a oil cooler? Thanks.... Here is the description in the ad: Attaches to block and your oil filter screws on to the adapter. Simplifies engine oil cooler installation. The thermostat directs oil to the cooler only when it is hot; starts at 160 degrees F and fully at 180!!! Oil goes thru the oil filter all the time. The adapter is 1 5/8" thick; connect with 1/2" ID hose; threads on fittings are 3/8" NPT X 1/2" ID hose barb. Last edited by JDMbyBlood; 01-28-2012 at 09:20 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode