CA ◄sr24 beast ultimate part out►full race│tial│tomei│toda│greddy│hks│blitz│apexi│earls ‼

[ETHANOLED SR]

It is time to part out my insane build ‼
I've spent lots of time, sweat, blood, tears, and needless to say insane amounts of money to get this dream to this point... within the last year or so I've had to balance 3 jobs, 2 kids, 1 wife all while working on my gemology graduate degree, I've had not a minute left to spare on my build. I've concluded that it's time to part with it and move on. It's taking space in my 1 car garage and I plan on getting a bike over the summer so I need it gone, never mind that my wife wants it destroyed and hates everything about it!

A little history recap... The beast has just been garaged collecting dust... I fire it up every now and then just to get the oil lubricating the internals and water temp to operating level. It's never seen the track, never dynoed the motor to enjoy the setups potential, drove it on the street one time to the gas station and back. It's lacking an aggressive clutch setup for all the power it is to put down, amongst other things like a better transmission and so on.
I've decided to part out instead of selling as whole because for 1 I doubt that anyone will buy the whole setup and 2 if someone does, I wouldn't get much for it! I'm already taking a huge loss as is!
If you've followed my build thread in the past then you know the amount of work and money that went into this setup... All the parts I've used are brand new high quality and top brand, The motor has been fired up less times then I can count on both hands. Ran at idle to operating temps and turned off... I can't even tell you mileage cause honestly it wouldn't add up to a few none the less.

I know how much all these parts go for and how much I paid for them brand new so plz don't low ball. My prices are what I think is a fair rate considering they're practically brand new still!
I will be updating the thread as often as I can due to the extended list of parts. I will take more pics by request but am also posting a bunch so probably no need to anyways.

Not sure how I plan on selling the fully built stroked block (when I say fully I mean FULLY just read the block specs for reference) but as of right now I'd rather part it out down to internals and all!
I will wait on the block part out till after I have sold most of the bolt-ons and externals. I am takoing offers in the meanwhile for anyone interested in the internals of the block and you'll be on a waiting list till then. No prices on the long-block and its internals as of yet but I will update as the part out moves along!
Cylinders were pressure tested at a 100 psi and the results were amazing at a 0% for 1 and 2 and 3% on 3 and 4!!! Not that it matters since it will be parted but I was very happy with the results I had to share it!

Don't know what else to add for now, if you've got questions then shoot otherwise I'll let the pics and parts speak for themselves! Thanks for checking out my part out and plz bump to help this move along!
PRICES DO NOT INCLUDE SHIPPING AND PAYPAL FEES!!!
PM ME FOR A FAST RESPONSE ALONG WITH A QUICK REPLY ON THIS THREAD.




SR24 PARTS LIST: PRICE:


GREDDY POLISHED PLENUM N15 BORE SOLD
N15 THROTTLE BODY 70MM SOLD
TOMEI T/B ADAPTER KIT SOLD
GREDDY POLISHED TOP FEED FUEL RAIL 10.5MM SOLD
I.D. 1000 CC TOP FEED INJECTORS SOLD
SARD ADJUSTABLE BLUE FPR WITH FUEL GAUGE AN TYPE SOLD
THERMAL GASKET 20.00
S13 AICV 120.00

-6 AN CUSTOM FUEL LINES SETUP SOLD
EARLS HIGH PRESSURE FUEL FILTER SOLD
WALBRO IN TANK 255 FUEL PUMP SOLD

BLITZ 3” INTERCOOLER CORE 300.00
CUSTOM PIPING AND BOV FALNGE 250.00
HKS SUPER SEQUENTIAL BOV 175.00
HOSE COUPLERS AND CLAMPS 60.00
[ABOVE FULL KIT OPTION] [700.00]

FULL RACE TWIN SCROLL DUAL WASEGATE MANIFOLD SOLD
FULL RACE TWIN SCROLL 3” DOWNPIPE SOLD
GARRETT TWIN SCROLL GT3076R .82 A/R V BAND 1250.00
W/POLISHED COMP HOUSING
2 TIAL MVS 38MM WASTEGATES BLUE 1.2BAR SPRINGS SOLD
2 DUMP PIPES AND V BAND FLANGES DIY KIT 160.00
CUSTOM EARLS AN LINES AND FITTINGS SOLD
7 LAYER METAL GASKET SOLD
T3 METAL GASKET SOLD
4” ALUMINUM CUSTOM PIPE WITH K&N FILTER CLAMPS SOLD
AND COUPLERS

APEXI POWER FC D-JETRO COMPLETE KIT SOLD
INNOVATE MTX-L WIDEBAND STANDALONE AFR KIT SOLD
GREDDY PROFEC B SPEC 2 BOOST CONTROLLER 225.00 SOLD
APEXI GAUGES (TACH, BOOST, EX. TEMP, WTR TEMP, SOLD
OIL TEMP, OIL PRESSURE) WHITE FACE WITH
CONTROL BOX. INCLUDES ALL WIRING AND SENSORS
TEIN EDFC UNIT AND WIRING 200.00
S13 IGNITOR CHIP 80.00

GREDDY LIGHTWEIGHT PULLEY KIT SOLD
KOYO RADIATOR 220.00
FLEX-A-LITE DUAL ELECTRIC FANS SOLD
BLUE RAD. HOSES W/WTR TEMP ADAPTER SOLD



SR24 LONG BLOCK SPECS AND LIST OF PARTS:


PEAK PERFORMANCE 2.35L 91MM BILLET STROKER CRANK
CUSTOM 90MM JE PISTONS
CARILLO CON-RODS
TOMEI UPGRADED LARGE OIL PAN
DARTON CAST IRON CYLINDER SLEEVES
ARP MAIN STUDS
WPC TREATED ACL RACE BEARINGS FOR MAINS AND CON-RODS
WPC TREATED PISTON RINGS
OEM OIL PUMP
OEM WATER PUMP
NEW TIMING CHAIN PARTS AND SEALS
TIMING CHAIN TENSIONER
GREX LARGE CYLINDER HEAD STUDS
^PENDING SALE^

CNC PORTED CYLINDER HEAD (FLOW BENCHED)
FERREA STAINLESS +1MM OVERSIZE VALVES-
ON INTAKE AND EXHAUSTS
TOMEI ROCKER ARM STOPPERS
WPC TREATED ROCKER ARMS (ALL – NEW)
TOMEI DOUBLE VALVE SPRINGS W/RETAINERS
TOMEI 280/280 SOLID PROCAMS
TOMEI SOLID PIVOTS WITH CUSTOM SHIMS SOLD
(ALL MEASURED AND DONE)
TODA RACING ADJUSTABLE CAM SPROCKETS SOLD



^^NO PRICES AS OF RIGHT NOW ON THE LONG BLOCK PARTS^^

INSANE AMOUNT OF PICS ARE COMING UP BELOW!!!