CA Rolling shell, 2JZ swap kit, 2JZGTE Swap CHEAP

[PROJECT240SX]

Hey guys,

I purchased this car back 02/03 down in San Diego. It was originally an automatic but I did a 5spd swap on it, and eventually went KA-T. The motor let go within 200mi of it being KA-T. After that I decided to pull the motor and tranny and planned on going with a 2JZ swap. I pulled the interior and still have all of the pieces for it. I also removed the front end and have a cleaner white front end for it, minus headlights, turn signals, and hood.

I thought I could hang onto this car to finish it but with family, school and my work I have absolutely zero time to work on the car, so I do not see myself finishing it in the future.

I have listed the price of everything together below, but if not here are my "Part Out Prices"

Car:
95 240SX
125,xxx Miles on Chassis
No sunroof
Power windows
Power locks
Battery relocated to trunk
Sound deadening material removed
Z32 N/A VLSD
Walbro 255lph fuel pump

(Part Out Price $850obo)

Extras
Nardi 330mm Deep Corn Steering Wheel
Sparco EVO2 Race Seat (Part Out Price $175)
Precision FMIC AS1025 600HP (BNIB) (Part Out Price $320)
DriftMotion 3" Intercooler Piping Kit (BNIB) (Part Out Price $150)
Mishimoto S14 SR Radiator (BNIB) (Part Out Price $200)

Engine: (Installed for test fitting) ($2000obo Part Out Price)
2JZ Aristo engine
USDM Supra water pump
OEM Toyota serpentine belt
OEM Toyota Timing Belt
No ECU


Transmission/Drivetrain: (Part Out Price $1200)
R154
1JZ Bell Housing
ARP Tranny to Engine Bolts
OEM Toyota 1JZ Flywheel
ARP Flywheel Bolts
OEM Toyota Clutch Release Hub Kit
DriftMotion Stage 2 Clutch
R154 Clutch Slave Cylinder
Steel Braided Clutch Hose
Custom Extended Shifter Housing



Suspension/BrakesWheels
5 lug swap (no ebrake assembly) (included w/car)
300zx front and rear calipers (included w/car)
300zx NA wheels ($150)
Tires are flat

Exterior:
Purple (decent condition)
White front end (not installed, no hood)

Swap kit: ($850)
Tech2 crossmember
Tech2 mounts
Custom tranny mount
Custom Steel Driveshaft

Wiring:
S14 KA harness (Excellent Condition) (Part Out Price $125)
Aristo harness (Excellent Condition) (Part Out Price $300)


I have over $5000 just in the swap and parts that I have for this car. This is a great project car for some one looking to take on a project and has the free time.




Price is $5000 OBO (As you know, MONEY TALKS)
Located in Salinas,CA

You will need a trailer to pick up the car or for the extra I can trailer it to you, if you are a reasonable distance from me. You will have to come see the car in person and leave a deposit or pay for the car in full if I am to deliver it.



Excuse the dust, webs and dirt I had the car sitting outside in the back of my house before bringing it in to work on it.