How To Install Jdm S14 Kouki Spoiler ???? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

98koukis14 · 04-14-2008, 12:03 PM

Okay my JDM KOUKI spoiler just came in so i trying to figure out how to install it, is there any modification do i have to do in order to swap my usdm S14 rear spoiler to jdm s14 kouki spoiler or it just bolt straight up please any help on this would be appriciated........thanks .....

i'm want to install this spoiler below ...

Jlee · 04-14-2008, 12:39 PM

how many studs came on your kouki wing? I know the outside wholes for the usdm spoiler don't line up and will need to be filled.. my kouki spoiler only came with 1 stud on each side so I ended up drilling my own holes in my current trunk.

I bought this spare trunk that came with USDM spoiler hoping the holes would line up, but the ones I circled in red sit just outside of the base of the spoiler and will need to be welded and filled.

Or it could be the other way around, it's been so long since I put my kouki wing on. Either way one of those holes sit just outside of the base of the spoiler...

Jon

98koukis14 · 04-14-2008, 03:26 PM

Quote:

Originally Posted by Jlee

how many studs came on your kouki wing? I know the outside wholes for the usdm spoiler don't line up and will need to be filled.. my kouki spoiler only came with 1 stud on each side so I ended up drilling my own holes in my current trunk.

I bought this spare trunk that came with USDM spoiler hoping the holes would line up, but the ones I circled in red sit just outside of the base of the spoiler and will need to be welded and filled.

Or it could be the other way around, it's been so long since I put my kouki wing on. Either way one of those holes sit just outside of the base of the spoiler...

Jon

okay i see what u sayin and my jdm spoiler did come with the studs on the inside part but the outside studs are missing so as long as the inside studs line with the holes on my usdm trunk i'm thinking to use solid double sided tape to put it on but i gotta get it painted first .....

.....so i'm hoping that it would work i'll let yall know how it goes ...hehe

Jlee · 04-14-2008, 04:14 PM

yea most ppl just bolt it up and use double sided tape to keep it from flapping around... but yea.. shouldn't be too expensive to fill the un-used holes.. good luck!

Jon

jackjack · 04-14-2008, 01:04 PM

^exactly.

make new holes where needed. fill unused holes.

spartanmisfit · 01-18-2013, 04:21 AM

Sorry for bringing this back from the dead but talk about a shitty answer. Of course you fill the the damn holes and make new holes. WTF! The question should have been, what's the best way to line up your new holes evenly and correctly? I'm about to install my new wing and was looking for some tips on lining up my new bolt holes.

04-14-2008, 12:03 PM	#1
98koukis14 Leaky Injector Join Date: Aug 2007 Location: Atlanta GA / Greenville SC Age: 39 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	How To Install Jdm S14 Kouki Spoiler ???? Okay my JDM KOUKI spoiler just came in so i trying to figure out how to install it, is there any modification do i have to do in order to swap my usdm S14 rear spoiler to jdm s14 kouki spoiler or it just bolt straight up please any help on this would be appriciated........thanks ..... i'm want to install this spoiler below ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-14-2008, 12:39 PM	#2
Jlee Zilvia Member Join Date: Jun 2007 Location: Toronto Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	how many studs came on your kouki wing? I know the outside wholes for the usdm spoiler don't line up and will need to be filled.. my kouki spoiler only came with 1 stud on each side so I ended up drilling my own holes in my current trunk. I bought this spare trunk that came with USDM spoiler hoping the holes would line up, but the ones I circled in red sit just outside of the base of the spoiler and will need to be welded and filled. Or it could be the other way around, it's been so long since I put my kouki wing on. Either way one of those holes sit just outside of the base of the spoiler... Jon

04-14-2008, 04:14 PM	#4
Jlee Zilvia Member Join Date: Jun 2007 Location: Toronto Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	yea most ppl just bolt it up and use double sided tape to keep it from flapping around... but yea.. shouldn't be too expensive to fill the un-used holes.. good luck! Jon

04-14-2008, 01:04 PM	#5
jackjack Post Whore! Join Date: Feb 2007 Location: Chi Posts: 2,899 Trader Rating: (2) Feedback Score: 2 reviews	^exactly. make new holes where needed. fill unused holes.

01-18-2013, 04:21 AM	#6
spartanmisfit Zilvia FREAK! Join Date: Jul 2008 Location: East Lansing, Michigan Posts: 1,332 Trader Rating: (18) Feedback Score: 18 reviews	Sorry for bringing this back from the dead but talk about a shitty answer. Of course you fill the the damn holes and make new holes. WTF! The question should have been, what's the best way to line up your new holes evenly and correctly? I'm about to install my new wing and was looking for some tips on lining up my new bolt holes.