MD Clean RB20DET engine part out. all internals, harnesses, lines, etc. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

iJDM · 07-03-2012, 07:41 AM

Update: 2/04/2013 bump from the dead, all parts are still available. I have another S chassis so trades will be considered. Feel free to make an offer, ask questions, etc. All parts are in great condition and ready to get your RB running. Will trade for sr parts, s13 coupe parts, 4 lug rims, etc.

Contact: Mike @ 410-330-1138 (text prefered)

Prices are all OBO and don't include shipping. (but I will ship items that are reasonable at your expense)

Located in Baltimore, Maryland.

Here's the main stuff I know I have:
Engine block- Comes with all hardware. Was taken to a machine shop and honed, it is in fantastic condition - $150
Lower Intake manifold- with all sensors and hoses, also comes with fuel rail and injectors - $75
Upper intake manifold- comes with throttle plate and all other hardware - $50
crankshaft - SPOTLESS - $60
Cams- with cam gears - $50 for both or $30 each
pistons with connecting rods- labeled 1-6. includes connecting rod nuts - $75 for all or $20 each
All 24 valves with springs and retainers labeled intake/exhaust along with number- $100 or $10 each
coil packs with hardware and harness- $75 for everything
Engine harness, no spliced connections- $100
IACV- $10
oil dipstick- $5
timing belt- $10
timing tensioner - $15
turbo down pipe hardware- $5
coil pack bolts- $5
oil pan bolts- $5
transmission bolts- $10
turbo/exhaust manifold hardware- $5
lower intake hardware
oil pump hardware-$5
cam angle sensor with cover- $15
ngk spark plugs- $10
ignitor with hardware-$15
spark plug cover with plate- $25
Both valve covers- comes w/ valve cover screws- $50 for both or $30 each
oil cap, good gasket- $2
Oil filter w/ gasket - $2
water pump with pulley- $25
oil filter housing - $10
motor mounts-$20

This is just a little of what I have, if you need something feel free to ask. All parts are OBO. The more you buy, the cheaper ill give it to you for. I need everything gone. Make offers.

If I don't answer I'm at work and ill get back to you asap. Thanks

Naytag629 · 07-03-2012, 07:46 AM

Bump for nice ASSets

iJDM · 07-06-2012, 05:35 PM

Bump. Some interest but those who are all don't have monies. Come get this stuff and make my wimmin happy.

two40guy · 07-06-2012, 08:15 PM

Ill take yer iacv, cold start valve thing lol o2 sensor if ya got one I want yo sensors!

two40guy · 07-06-2012, 08:15 PM

Water pump too

iJDM · 07-06-2012, 08:18 PM

PM sent.

Msglngth

two40guy · 07-06-2012, 08:34 PM

replied. thanks dude!

iJDM · 07-06-2012, 08:53 PM

Quote:

Originally Posted by two40guy

replied. thanks dude!

Not a problem man. Found some parts you needed.

Humpty hump

247_c2c · 07-07-2012, 02:47 AM

Hey do you have an oil pan?? Mine is kinda messed up from being so low lol

iJDM · 07-07-2012, 08:14 AM

Quote:

Originally Posted by 247_c2c

Hey do you have an oil pan?? Mine is kinda messed up from being so low lol

Haha I know I do. I'll just have to find it. I found the bolts lookinf for parts last night but don't remember if I saw the pan itself. I should have it though.

Pm me contact information and ill keep in touch.

Cam caps SOLD.

IACV spoken for.

Head has had a lot of interest but nobody has paid me yet. BUMP

iJDM · 08-02-2012, 08:26 PM

Head sold.

Bump from the dead. Taking any offers. Willing to ship.

budderigs · 09-16-2012, 06:23 PM

do you still have the intake manifold? I need the upper and the injector o rings? can you get a qoute to ship to 55055

iJDM · 02-04-2013, 03:43 PM

BUMP

now willing to trade for s13 coupe, sr parts, 4 lug wheels. Make an offer!

iJDM · 02-04-2013, 06:09 PM

Knock sensors are sold!

iJDM · 02-07-2013, 10:20 AM

TTT

A LOT of stuff still available, it's all in fantastic condition. I have no need for it so make some offers! The more you buy the better of a deal I'll give you.

iJDM · 02-11-2013, 12:53 PM

Making a trip to the post office in a few hours anybody need anything?

TyP · 02-11-2013, 08:38 PM

if the ignitor is in working order i will take it what is your paypal

iJDM · 02-11-2013, 08:42 PM

Quote:

Originally Posted by TyP

if the ignitor is in working order i will take it what is your paypal

Ignitor just shipped out today, sorry sir. Is there anything else you need? A lot of stuff left....

wahhpshh · 02-11-2013, 08:43 PM

do you have an ecu?

iJDM · 02-11-2013, 08:44 PM

Quote:

Originally Posted by wahhpshh

do you have an ecu?

ECU wasn't received with the swap, sorry!

wahhpshh · 02-11-2013, 08:47 PM

i may still be interested in a few things. trying to figure out when ill be up youre way to check out block/head

iJDM · 02-11-2013, 08:57 PM

Sounds good sir, just let me know. As stated in the description, the head was sold a while back. but just the bare head. The block is still up for grabs and is in fantastic condition. The more you buy the cheaper you get it

wahhpshh · 02-11-2013, 09:23 PM

cool deal. i have a friend that needs parts as well.. pm me a price on everything if you dont mind.

iJDM · 02-12-2013, 08:54 AM

Quote:

Originally Posted by wahhpshh

cool deal. i have a friend that needs parts as well.. pm me a price on everything if you dont mind.

PM sent

karl wasabi · 02-12-2013, 03:35 PM

Great person to deal with! Free bump for you sir!

iJDM · 02-12-2013, 04:47 PM

Quote:

Originally Posted by karl wasabi

Great person to deal with! Free bump for you sir!

Thank you very much sir. Hope to hear from you in the future

Priddy · 02-16-2013, 12:57 AM

Hey do you still have the engine harness, coilpack with harness, spark plugs, and the ignitor still?

Edit: also what about cas and the spark plug and valve covers.

As you can tell I need quite a bit

dmnspdzeus · 02-16-2013, 01:26 AM

I need the engine harness please!

91EfSi · 02-16-2013, 02:44 AM

By chance have Alternator with bracket and Powersteering with bracket as well?

iJDM · 02-16-2013, 08:48 AM

Quote:

Originally Posted by 91EfSi

By chance have Alternator with bracket and Powersteering with bracket as well?

Everyone pm'ed for what I have! Thanks!

07-03-2012, 07:41 AM	#1
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	Clean RB20DET engine part out. all internals, harnesses, lines, etc. cheap prices Update: 2/04/2013 bump from the dead, all parts are still available. I have another S chassis so trades will be considered. Feel free to make an offer, ask questions, etc. All parts are in great condition and ready to get your RB running. Will trade for sr parts, s13 coupe parts, 4 lug rims, etc. Contact: Mike @ 410-330-1138 (text prefered) Prices are all OBO and don't include shipping. (but I will ship items that are reasonable at your expense) Located in Baltimore, Maryland. Here's the main stuff I know I have: Engine block- Comes with all hardware. Was taken to a machine shop and honed, it is in fantastic condition - $150 Lower Intake manifold- with all sensors and hoses, also comes with fuel rail and injectors - $75 Upper intake manifold- comes with throttle plate and all other hardware - $50 crankshaft - SPOTLESS - $60 Cams- with cam gears - $50 for both or $30 each pistons with connecting rods- labeled 1-6. includes connecting rod nuts - $75 for all or $20 each All 24 valves with springs and retainers labeled intake/exhaust along with number- $100 or $10 each coil packs with hardware and harness- $75 for everything Engine harness, no spliced connections- $100 IACV- $10 oil dipstick- $5 timing belt- $10 timing tensioner - $15 turbo down pipe hardware- $5 coil pack bolts- $5 oil pan bolts- $5 transmission bolts- $10 turbo/exhaust manifold hardware- $5 lower intake hardware oil pump hardware-$5 cam angle sensor with cover- $15 ngk spark plugs- $10 ignitor with hardware-$15 spark plug cover with plate- $25 Both valve covers- comes w/ valve cover screws- $50 for both or $30 each oil cap, good gasket- $2 Oil filter w/ gasket - $2 water pump with pulley- $25 oil filter housing - $10 motor mounts-$20 This is just a little of what I have, if you need something feel free to ask. All parts are OBO. The more you buy, the cheaper ill give it to you for. I need everything gone. Make offers. If I don't answer I'm at work and ill get back to you asap. Thanks __________________ 1990 s13 hatch sr20det 2001 Lexus is300 Last edited by iJDM; 02-11-2013 at 12:54 PM.. Reason: bump from the dead, added pic.

07-06-2012, 05:35 PM	#3
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	Bump. Some interest but those who are all don't have monies. Come get this stuff and make my wimmin happy. __________________ 1990 s13 hatch sr20det 2001 Lexus is300

07-06-2012, 08:18 PM	#6
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	PM sent. Msglngth __________________ 1990 s13 hatch sr20det 2001 Lexus is300

08-02-2012, 08:26 PM	#11
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	Head sold. Bump from the dead. Taking any offers. Willing to ship. __________________ 1990 s13 hatch sr20det 2001 Lexus is300

02-04-2013, 03:43 PM	#13
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	BUMP now willing to trade for s13 coupe, sr parts, 4 lug wheels. Make an offer! __________________ 1990 s13 hatch sr20det 2001 Lexus is300

07-03-2012, 07:46 AM	#2
Naytag629 Zilvia Member Join Date: Nov 2009 Location: Columbus, OH - Clarksburg, WV Age: 37 Posts: 155 Trader Rating: (11) Feedback Score: 11 reviews	Bump for nice ASSets

07-06-2012, 08:15 PM	#4
two40guy Zilvia Junkie Join Date: Sep 2009 Location: binghamton,ny Posts: 442 Trader Rating: (9) Feedback Score: 9 reviews	Ill take yer iacv, cold start valve thing lol o2 sensor if ya got one I want yo sensors!

07-06-2012, 08:34 PM	#7
two40guy Zilvia Junkie Join Date: Sep 2009 Location: binghamton,ny Posts: 442 Trader Rating: (9) Feedback Score: 9 reviews	replied. thanks dude!

07-07-2012, 02:47 AM	#9
247_c2c Zilvia Member Join Date: May 2012 Location: Lake Elsinore, Ca Posts: 250 Trader Rating: (7) Feedback Score: 7 reviews	Hey do you have an oil pan?? Mine is kinda messed up from being so low lol

09-16-2012, 06:23 PM	#12
budderigs Leaky Injector Join Date: Jun 2012 Location: newport mn. Age: 41 Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	do you still have the intake manifold? I need the upper and the injector o rings? can you get a qoute to ship to 55055

02-04-2013, 06:09 PM	#14
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	Knock sensors are sold! __________________ 1990 s13 hatch sr20det 2001 Lexus is300

02-07-2013, 10:20 AM	#15
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	TTT A LOT of stuff still available, it's all in fantastic condition. I have no need for it so make some offers! The more you buy the better of a deal I'll give you. __________________ 1990 s13 hatch sr20det 2001 Lexus is300

02-11-2013, 12:53 PM	#16
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	Making a trip to the post office in a few hours anybody need anything? __________________ 1990 s13 hatch sr20det 2001 Lexus is300

02-11-2013, 08:38 PM	#17
TyP Join Date: Jan 2013 Location: Tampa Fl Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	if the ignitor is in working order i will take it what is your paypal

02-11-2013, 08:43 PM	#19
wahhpshh Join Date: Jan 2013 Location: east tennessee Age: 36 Posts: 34 Trader Rating: (1) Feedback Score: 1 reviews	do you have an ecu?

02-11-2013, 08:47 PM	#21
wahhpshh Join Date: Jan 2013 Location: east tennessee Age: 36 Posts: 34 Trader Rating: (1) Feedback Score: 1 reviews	i may still be interested in a few things. trying to figure out when ill be up youre way to check out block/head

02-11-2013, 08:57 PM	#22
iJDM Zilvia Addict Join Date: Aug 2011 Location: Baltimore, MD Posts: 625 Trader Rating: (10) Feedback Score: 10 reviews	Sounds good sir, just let me know. As stated in the description, the head was sold a while back. but just the bare head. The block is still up for grabs and is in fantastic condition. The more you buy the cheaper you get it __________________ 1990 s13 hatch sr20det 2001 Lexus is300

02-11-2013, 09:23 PM	#23
wahhpshh Join Date: Jan 2013 Location: east tennessee Age: 36 Posts: 34 Trader Rating: (1) Feedback Score: 1 reviews	cool deal. i have a friend that needs parts as well.. pm me a price on everything if you dont mind.

02-12-2013, 03:35 PM	#25
karl wasabi Post Whore! Join Date: Dec 2006 Location: Walnut/SoCal Posts: 3,898 Trader Rating: (41) Feedback Score: 41 reviews	Great person to deal with! Free bump for you sir! __________________ Karl Wasabi Private Seller - Review Thread

02-16-2013, 12:57 AM	#27
Priddy Join Date: Dec 2012 Location: Memphis Age: 32 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Hey do you still have the engine harness, coilpack with harness, spark plugs, and the ignitor still? Edit: also what about cas and the spark plug and valve covers. As you can tell I need quite a bit

02-16-2013, 01:26 AM	#28
dmnspdzeus Zilvia Member Join Date: Jan 2013 Location: nevada Age: 36 Posts: 190 Trader Rating: (0) Feedback Score: 0 reviews	I need the engine harness please!

02-16-2013, 02:44 AM	#29
91EfSi Leaky Injector Join Date: Dec 2011 Location: Salina, Kansas Age: 34 Posts: 140 Trader Rating: (4) Feedback Score: 4 reviews	By chance have Alternator with bracket and Powersteering with bracket as well?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode