Sr20 is cutting out in neutral. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

trust hks · 04-15-2004, 01:26 AM

The car has a stable idle at 800rpms. It drives fine but everytime , I am at a roll to a stop and shift into neutral , the engine cuts off and it dies. Sometimes it seriously drops down to 0 rpms and comes back alive , but thats like 40% of the time. Any suggestions?

Only mods are " 3'' downpipe , i beleive also I'm using a KA24 MAF.
I cleaned the TB as much as I can , and I also checked the MAF wires.

04-15-2004, 01:26 AM	#1
trust hks Zilvia Member Join Date: Apr 2003 Location: IL Posts: 213 Trader Rating: (1) Feedback Score: 1 reviews	Sr20 is cutting out in neutral. The car has a stable idle at 800rpms. It drives fine but everytime , I am at a roll to a stop and shift into neutral , the engine cuts off and it dies. Sometimes it seriously drops down to 0 rpms and comes back alive , but thats like 40% of the time. Any suggestions? Only mods are " 3'' downpipe , i beleive also I'm using a KA24 MAF. I cleaned the TB as much as I can , and I also checked the MAF wires.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode