auto to manual wiring in a s13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ivan · 05-27-2004, 11:36 PM

I tried searching and couldn't come up with instructions on the wiring. Anybody have them? for an s13.

180PWR · 05-28-2004, 08:09 AM

Theyre really isnt much wiring to do.. Just look under your fuse box for the big brown plug with the 2 fat wires, Jump them and thats it.. When you put the 5 speed tranny in, connect the speed sensor and your done!
5 speed trannys are purely mechanical.. no big deal

Ivan · 05-28-2004, 08:47 AM

okay. when I searched some people were talking about switching wires around and stuff. So jump the big wires. what about the reverse lights?

FRpilot · 05-28-2004, 12:11 PM

are the harnesses that connects to the auto speed sensors the same ones used for manual harness transmision? is it plug and play? how about the wiring for the clutch safety and what not. (wiring for how you need to depress the clutch in first to start the car.)

AlexAtPerformanceNissan · 05-28-2004, 12:24 PM

Quote:

I tried searching and couldn't come up with instructions on the wiring. Anybody have them? for an s13.

180PWR answered your question brotha...but check out this link:
Electircal Wiring for Auto->Manual on S14

Quote:

Originally Posted by 180PWR

Theyre really isnt much wiring to do.. Just look under your fuse box for the big brown plug with the 2 fat wires, Jump them and thats it.. When you put the 5 speed tranny in, connect the speed sensor and your done! 5 speed trannys are purely mechanical.. no big deal

mjjstang · 05-28-2004, 04:56 PM

thanks for that link, im also in the process and would like to get this cleared up asap, I was told all I have to do,to do the conversion as far as electrical was jump the wire and thats it. are all the others optional or what.

Ivan · 05-28-2004, 05:29 PM

on that link. are the s13's the same? as in the connectors and location and everything? also since its an s13, do I have to wire in the neutral safety and ascd??

mjjstang · 05-28-2004, 07:09 PM

oh and it also talks about cutting in to at harness, I will be putting mt harness in so I shouldnt have to cut into the harness, all I have to do is the first step by completeing circuit and maybe the reverse lamp part right.

Ivan · 06-01-2004, 09:22 AM

Quote:

Originally Posted by Ivan

do I have to wire in the neutral safety and ascd??

I wanna comfirm if I have to do this? Its for an s13. I've searched and some people say no while others say yes.

180PWR · 06-01-2004, 11:03 AM

No you dont have to wire ANYTHING BUT THE SPEED SENSOR ON AN S13 TRANNY unless you wanna go through worthless work.
I have just the Speed sensor connected on my brother in laws S13 and the car runs like a champ with no CEL for 2 years now.
Stop making it more complicated than it is.

mjjstang · 06-01-2004, 01:51 PM

now to the subject of the speed sensor, I had an s13 auto tranny and tried to take it out, I took the one screw out and the thing would not budge, so i ended up just throwing the tranny out cause it was shot anyway, could I use an auto tranny sensor anyway, Plus I still have to take the one off my sr tranny so how would I go about doing this. Is it that hard or is mine just being a PITA.

05-27-2004, 11:36 PM	#1
Ivan Leaky Injector Join Date: Nov 2003 Location: IL Posts: 83 Trader Rating: (0) Feedback Score: 0 reviews	auto to manual wiring in a s13 I tried searching and couldn't come up with instructions on the wiring. Anybody have them? for an s13.

05-28-2004, 04:56 PM	#6
mjjstang Post Whore! Join Date: Apr 2003 Location: Michigan Posts: 2,654 Trader Rating: (5) Feedback Score: 5 reviews	thanks for that link, im also in the process and would like to get this cleared up asap, I was told all I have to do,to do the conversion as far as electrical was jump the wire and thats it. are all the others optional or what. __________________ I was going to, but I can not think of a sig less than 75 characters.

05-28-2004, 07:09 PM	#8
mjjstang Post Whore! Join Date: Apr 2003 Location: Michigan Posts: 2,654 Trader Rating: (5) Feedback Score: 5 reviews	oh and it also talks about cutting in to at harness, I will be putting mt harness in so I shouldnt have to cut into the harness, all I have to do is the first step by completeing circuit and maybe the reverse lamp part right. __________________ I was going to, but I can not think of a sig less than 75 characters.

06-01-2004, 01:51 PM	#11
mjjstang Post Whore! Join Date: Apr 2003 Location: Michigan Posts: 2,654 Trader Rating: (5) Feedback Score: 5 reviews	now to the subject of the speed sensor, I had an s13 auto tranny and tried to take it out, I took the one screw out and the thing would not budge, so i ended up just throwing the tranny out cause it was shot anyway, could I use an auto tranny sensor anyway, Plus I still have to take the one off my sr tranny so how would I go about doing this. Is it that hard or is mine just being a PITA. __________________ I was going to, but I can not think of a sig less than 75 characters.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-28-2004, 08:09 AM	#2
180PWR Leaky Injector Join Date: Jun 2003 Location: Miami, FL Age: 42 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	Theyre really isnt much wiring to do.. Just look under your fuse box for the big brown plug with the 2 fat wires, Jump them and thats it.. When you put the 5 speed tranny in, connect the speed sensor and your done! 5 speed trannys are purely mechanical.. no big deal

05-28-2004, 08:47 AM	#3
Ivan Leaky Injector Join Date: Nov 2003 Location: IL Posts: 83 Trader Rating: (0) Feedback Score: 0 reviews	okay. when I searched some people were talking about switching wires around and stuff. So jump the big wires. what about the reverse lights?

05-28-2004, 05:29 PM	#7
Ivan Leaky Injector Join Date: Nov 2003 Location: IL Posts: 83 Trader Rating: (0) Feedback Score: 0 reviews	on that link. are the s13's the same? as in the connectors and location and everything? also since its an s13, do I have to wire in the neutral safety and ascd??

06-01-2004, 11:03 AM	#10
180PWR Leaky Injector Join Date: Jun 2003 Location: Miami, FL Age: 42 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	No you dont have to wire ANYTHING BUT THE SPEED SENSOR ON AN S13 TRANNY unless you wanna go through worthless work. I have just the Speed sensor connected on my brother in laws S13 and the car runs like a champ with no CEL for 2 years now. Stop making it more complicated than it is.