Cruise Control wiring?

[Cory Scheuer]

Hey guys

Car details

1997 240sx, MT, LE

i ripped out the factory steering wheel and put in a momo... horn is wired in fine...

well today i decided to wire in my cruise control using the factory buttons (mounted it to the bottom of the removal surround)

Im having issues with the wiring and cant seem to figure it out... i have read this tutorial: http://importnut.net/steeringswap.htm and some of it helped, but most confused me....

essentially what i am doing is going from the cruise control buttons directly to the wiring harness under the dash...

there are 4 wires... 1 far red (about 2 pins away from the other group of 3) this i know goes to the horn wiring... got that one

the other main 3 i am having issues...

yellow, blue, and red

then on the harness under the dash, im suppose to connect them to the brown-yellow, brown-green, brown-white

now what wire goes to what wire... i have tried a couple different ways but nothing seems to work...

any thoughts? i have gone through the FSM and havent figured it out... hard to tell what wire is what as the copy i have doesnt give off coloring of said wires etc...

so all i need to know is which brown-xxxxx wire do i connect to the blue, which brown-xxxxx wire do i connect to the yellow, and which brown-xxxx wire do i connect to the red....

thanks in advance!