Kouki KA-T Build Thread

[josh_schul]

***Please move to builds section, sorry for the inconvenience***

Well it has been a while since ive first purchased my 1997 240sx and I figured id post a semi proper build thread since my first post has made much more progress.

Well i picked this bad boy up in January of 2012 from a guy in Delaware for 4200 bucks. Stock SE, auto, non abs, 13X,XXX miles 2 owners ... pretty good condition... no rust. And the guy was planning to swap an s14 sr in it so that came home with me too. However upon inspection the SR head was missing all kinds of shit, and honestly wasnt wanting an SR anyway. So I ended up parting that out to help get my 5 speed swap and some coilovers and what i had left to start building a spare KA i had bought locally (ended up being total junk ). So with that said over many long nights, spending money left and right, and countless drunken stoopers heres where its at...

Build List

Engine and Drivetrain:
KA24DE All New Gaskets and Seals
Bottom end work all done in House at R & W Enterprises
-Block Hot Tanked, Baked, Decked, Sleeved, Bored and Honed blah blah blah
-Manley Rods
-Supertech 9:1 .020+ Pistons
-Clevite Main Bearings
-Clevite Rod Bearings
-ARP Rod Bolts
-ARP Main Studs
-ARP Head Studs
-Crank was micro-polished
-Fully Balanced Rotational Assembly
Head received a full rebuild and some S13 240/248 cams
Timing Chain
Water Pump
Oil Pump
Full 3” HKS Hi Power Exhaust
***Also fabing up a set of custom 3.5" blast pipes
Airesearch T3/T4 Hybrid turbo (TO4B compressor housing .60 AR
machined to fit TO4E 57 compressor wheel. Turbine is a T3 5 bolt .63 AR
machined to stage 3 with a ptrim turbine wheel re-profiled to fit a stage
three hole)
Oil feed lines
CX Racing T3/T4 Top Mount Manifold
CX Racing Down Pipe
38mm Tial Wastegate
SR 370cc Injectors
Precision 880cc Injectors
Top Mount Fuel Rail
Walbro 255 Fuel Pump
HKS SSQV Blow off Valve
Custom High Mount Intercooler
CX Racing Radiator
Dual Slim Fans
Z32 MAF
HKS Shroom Filter
NGK BKR7E Plugs
HKS Turbo Timer
Enthalpy Tuned ECU
5 Speed Trans
RB25DET XTD Lightweight Flywheel
RB25DET XTD Stage 3 6 Puck Sprung Clutch
Interior:
NRG Short Hub
NRG Quick Release
NRG 350mm Black Suede Red Stitch Wheel
Proper Bubble Shift Knob
Proper E-brake Knob
Glowshift 7 Series Gauges (Oil Pressure, A/F w/ wideband, and Boost)

Exterior:
Uras Type 4 Rep Front
Vertex Rep Sides
Vertex Rep Rear
9k Racing Dmax Rep Roof Spoiler
GP Sports Rep 3 Piece Trunk Spoiler
***Paint Coming Soon*** (A new twist on Hellrot Red ;P)
Morimoto Mini H1 Bixenon Projector Retroquick with Gattling Gun Shrouds in Blacked Out Headlight Housing

Suspension/Handling:
Function and Form Type 2 Coilovers
10k Swift Upgrade Springs for the Front
Godspeed Gen 2.5 Arm Package
Project Mu Locking Lugs
17x9+25 17x10.5+20 Mustang Wheels (Black Chrome)
17x8.5 +30 Cobra Wheels +30mm Spacers (Drift Spares)
15mm Spacers Front 10mm Spacers Rear

While waiting for some parts in the mail... i got parts in the mail!



So I started to order some parts here and there for the 5 Speed swap since the auto had to go... and plopped that in with the help of my buddy Jake Shoemaker and my buddy AK. Here's how she sat after all that...


Getting to work... (aka a random collection of events and images leading up to today)

Rods

Supertech Pistons

Poopy Fitment

Booty Hole

Interesting...

Interior Shot

Bought this stuff and then sold most of it other than some seals and gaskets lol

Blast Pipes (need to add 3.5" chrome slant tips this weekend)

"Clubloose Apparel" and my Autotimer

AK's Fully Built SR Zenki/Thee Garage

KDF Stuff

Stockpiling for shredding season

Morimoto Minis in place of stock projector (much better output imo)

Made some adjustments and got and alignment so she sits pretty...

Dope aristo from the FDR meet (SUPRLIFE)

Shoemakers S13 318rwhp SR


Spring Moves for some shredding with ^^^

Got my roof wing in the mail... so i casually put it on my dads corolla while picking it up from home...

Starting to test fit the kit...

Built motor home for final assembly...

Banishing the demon that put the car out of commission.... Guess that one day when smoke started pouring out of my front vents smelling like burning electrical will do that. Replaced every single harness in the thing.

Built Motor is in for first start and an idea of where im going...


More tomorrow if i have the time ... too tired.