TN FS: KA24E Build: Ready for Boost

[boostedsohcs13]

I've got a KA24E that I've been building for turbo for the better part of 2 years now. Priorities have changed and I'm looking to get out from under it and send it to a good home. All parts are new and top quality. All bolts are in their own separate, labeled baggies to help with assembly. All OE parts (alternator, p/s steering pump, etc) can come with as well. Bottom end (pistons, rods, crank) is assembled already. The build only lacks timing parts, valves, a fuel setup, and a turbo setup. I have well over $2300 in this build not including my time....$1500 is more than a fair price for the quality. It should be good to hold 400-500hp at the very least. Parts I have in it include, but are not limited to:

KA24E Block Bored .20 over and Decked
Polished Crank
Wiseco Forged Pistons (DOHC pistons)
Wiseco Piston Rings
Eagle H-Beam Rods (DOHC rods)
Clevite Main Bearings
Clevite Rod Bearings
ARP Main Studs
ARP Rod Bolts
O&J Stage 2 Cam
O&J Mechanical Lifters
O&J Outer Valve Springs
Nissan Inner Valve Springs
Nissan Keepers
Nissan Valve Spring Seats
Bronze Valve Guides
TOGA Valve Stem Seals
t3/t4 Log Exhaust Manifold
EGR Block Off Plate

Local pick-up is preferred, but I will meet halfway between myself and reasonably close places. Contact me via text at 6156134881, or email at [email protected]