Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-21-2015, 06:42 PM   #1
DemonSlayer
 
Join Date: Aug 2010
Location: USA
Age: 36
Posts: 15
Trader Rating: (0)
DemonSlayer is an unknown quantity at this point
Feedback Score: 0 reviews
Sr random plugs? Vaccum?

I bought a wiring specialties wiring harness for my car. Redtop into a 91 240. I am almost done with the swap but I have a few random plugs I can't find a place to plug into. The little booklet they gave me doesn't say anything about them and I just can't find what they are. I'd hate to fire up the car to have it explode because something wasn't hooked up right. My last swap I did the harness myself and had no spare plugs, so I'm a bit confused. Imgur gallery for the plugs below.

Also, the tube that connects to my factory oil catch can, I have a T coming out of the valve cover, one goes to the can, other is cut. I've seen some pictures where people just stick a little air filter on it and call it good. Others say to put it on the intake. I don't have any bungs or anything, I just wanna make sure I can stick a little air filter on it. What does it do?

Vaccum!! I've read a lot of vaccum threads and I'm still confused. Seems people have their vaccum going EVERYWHERE. I just wanna make 100% certain. Top left nipple on TB goes to my FPR and I have it T'd for my EBC. People say not to T it but the booklet for my greddy oled EBC says to T that line. Then the top right goes to bov. Bottom goes to wastegate and T's for boost solonoid. I have read that works, I've also read you should cap bottom and use put wastegate on hot pipe. I don't have any spare bungs or anything on my hot pipe so... My biggest source of confusion is the bottom nippe is the same size as my BOV, even though I've read to use the top right nipple for bov. Then my WG nipple is same size as top right nipple but people say to use that for bov and the bottom for WG? Do I need to get 2 resizers and stuff?

Unfortunantly, I won't be able to drive for 2 months. Stupid work out of town. I was hoping to get it going this week but we ran into problem after problem! Oh man it's killin me waiting D:!!!

Random plug 1, http://imgur.com/XVMg17A
Random plugs 2 and 3, http://imgur.com/dW0ueox
Random plugs 4 and 5, http://imgur.com/HLKmiG1
Random plug 6, http://imgur.com/c1uUSdz
Weird T thing for oil catch can, http://imgur.com/xMAm2J8

For some reason I couldn't make an imgur gallery :/

Thanks for the help guys and happy motoring
DemonSlayer is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net