TX sr20det full swap with tons of extras

[jppierre]

im selling most of my 240 parts to get a downpayment on a new car

for sale is a s13 sr20det swap, head has less then 4 miles on it and most everything is new.
im including 2 prefectly working transmissions with low miles and 2 sets of injectors, 2 maf sensors and way more stuff

Details:

s13 sr20det with 150psi on all cylinders
new head with less than 4 miles
spec 6 puck clutch
new throw out bearing
Rocker arm stoppers brand new
Oem brand new water pump
alternator
power steering pump
betls
intake manifold with all sensors
stock exhaust manifold
isis rs3871 turbo
Arp head studs
new headgasket
oem starter
oem maf sensor
s13 harness converted to run on s14
370cc injectors with fuel rail
isis s14 water neck
steel braided lines (water and oil)
lower harness
transmission spacers or shield
5 speed transmission with all sensors
coilpacks with subharness
63 ecu
02 sensor (skinny)
wiring specialties oem maf quick plug


now the good stuff (basically free to sweeten up the deal)
Details:

Blackworks sr20 radiator for s14 with hoses
740cc hks side feed injectors with fuel rail
Gti-r t28 .86 turbo basically new with aftermarket elbow pipe with divider
isis z32 maf
wiring specialties z32 quick plug
another 5 speed tranmission with sensors
walbro 255 fuel pump used for like 20 mins
isis BNIB water pump with seal
isis brand new starter
Greddy intercooler (it has a hole but was welded and also jb weld on top to seal)
completle intercooler piping with couplers
huge intake pipe for z32 maf and with adapter for stock maf
E5 ecu tuned for 740cc z32 maf and t28 .86 turbo (tuned by suspicious garage i think it could be retuned by rs enthalpy)
and a box full of extra stuff and new seals

basically this is a drop and go swap... i just have no time to put it back in my car i want $2700 for all of it... this is not obo... price is firm, you pay pal fees and i can ship it if you pay shipping
located in El Paso TX
Pm me or text me at 9156159470

almost forgot to add that the oil feed on block is stripped so i put a bolt in it to seal it and i was using a greddy sandwich plate to feed oil to turbo... i can sell the oil sandwich plate for extra with the long steel braided line