CA 1997 Nissan 240sx SE

[DUDEIDONTHAVEA240]

1997 Nissan 240sx SE
Clean Georgia title
(Car is currently located in San Diego, California)

This car came factory with an automatic transmission, power windows, power locks, power mirrors & no sunroof. I have owned the car since 2009 & originally wanted a fun daily so I converted it into a manual transmission and swapped in a built KA24DET. I drove that for a while, had a throttle body screw come loose and blow my motor up . My intention was to re-build a stout rb25det and possibly drag race it on the weekends. Life happened, I am now a proud father of a beautiful little girl and my priorities have shifted hence the reason for selling. Overall the car is in excellent condition. This is a project car and will need to be towed. This car is NOT running. Feel free to contact me via this listing, phone/text (619)739-3296 or email at [email protected] Asking price is $8,000 OBO.






Please check out the imgur album. There are 181 images of the car, items, paperwork, etc.


LINK TO FULL ALBUM
http://imgur.com/a/MzADb

*-*-*MISSING PARTS*-*-*
MAF
Throttle body
Downpipe

Motor/Drivetrain:

!!MOTOR HAS SEEN NO FLUIDS !!

-RB25DET Series 1 motor w/ RB25 5 speed transmission
-All new OEM Gaskets
-Cometic head gasket
-Nissan N1 oil pump
-Nissan N1 water pump
-ACL bearings
-CP Pistons
-Manley Rods
-ARP head studs
-ARP main studs
-Raw Brokerage Crank Collar / Professionally installed by Car Parts Machine
-Tomei Poncams 256/256
-Tomei adjustable cam gear exhaust
-Greddy Intake manifold / painted with VHT
-ACT 350z 350mm clutch
-Exedy Billet Chromoly Flywheel
-Zerolift motor mounts/trans mount/ 1 piece steel driveshaft
-Megan racing engine and transmission mounts
-J30 differential

Machine shop work (Vat clean, block report, crank report, polish, alignbore, deck inline, bore and hone, plugs, balance rotating assembly, fit pin + mount piston, machine and install pump drive, resurface, file fit rings) All work done by Car Parts Machine in El Paso TX.

Fuel:
-Walboro 255 in tank
- -8 AN Braided Fuel Hose/Feed/Fittings Tank to Engine
- -6 AN Braided Fuel Hose/Return
- Bulk head Fittings installed at the fuel tank cap
-Russell Competition 40 Micron Inline fuel filter installed on feed line

Electrical:
-Battery relocated to the trunk with the main power running through the interior of the car.

Cooling:
-Koyo 3 Row Aluminum Radiator
-Front mount intercooler w/piping
-Aluminum Over flow tank
-Aluminum Reservoir for Power Steering with AN fittings & Nylon Black braided lines

Suspension:
-KYB AGX springs and struts
-SPL aluminum subframe collars

Wheels :
-350z wheels (x4) in fair condition w/ tires that are only good as rollers
-Weld Prostar 15x8 (x2) 9/10 condition w/ Mickey Thompson ET Streets 26x10.5. Currently mounted on the car.

Interior :
-95 240sx seats front and rear
-Kenwood KDC138 Headunit
-Nardi Sport Rally Deep Corn 330mm (black with red stitching)
-NRG Short hub black
-NRG quick release 2.5 black/black

Extras:
-Carbon fiber front cover and coil pack cover for rb25
-Stainless BRM exhaust w/ Magnaflow resonator/muffler (used from KA setup)
-Various Stainless 3" Mandrel bent piping w/ flanges
-HKS SSQv3 BOV (x2)
-ISIS short throw shifter
-OEM brand new driver side upper & lower door hinges
-Bosch 044 external fuel pump
-AEM 3.5 bar map sensor
-All Components to add A/C
-AEM serial gauge with complete harness and silver faceplate (included with car)
-Summit Oil cooler Setup / -10 an fittings & Nylon Black braided lines (included with car)

Also for sale:
-PTE 1600cc injectors x6