Blinkers in the front, hazards in the rear, plz help

[Jacob Butler]

My turn signals have not been working since i put the dash back in, hazards worked but only in the rear. No clicking, no dash arrows for signals. Hazards make dash arrows come one and clicking. Also high beam dash light doesn't come on. All fuses good and the flasher relay is good. I took the signal stalk apart and everything seems fine. So I replaced the small white tcu box behind drivers kick panel. Now my front signals work but no rear. Rear hazards work but not front. I get the clicking sound from the signals but no dash arrows. All bulbs are good. Pretty sure if the wiring was messed up i would have seen it with the dash out. I also checked the wiring going to rear and front signals. I cant find anything that i forgot to plug in or something. Ive checked the fsm for a hazard/turn signal diagram with no luck. What else could it be? Thanks for your time.