MA 1994 240sx / rb26 swap / cd009

[tuzzio]

This has been parted out and sold, MODS CAN CLOSE.

Title in hand. Car does have light rust, but is absolutely a useable chassis. The strut towers and frame rails are in very good shape. This was a complete drift car, and the suspension / interior has been parted out. I have compression test videos from 7/31/2021, as well as a cold start video from 8/4/2021. This is a chassis with a complete swap. It does NOT have axles, diff, alignment, brakes, e-brake, good ball joints, etc. It is to be purchased for the complete swap, or a project car.

I have receipts from RPE Machine LLC for the engine build, as well as receipts for the internals. The car made 523/ 391TQ at Performance & Styling in Manchester, CT on its current tune.


-RB26 05U Block
-Nitto Crank Collar
-Nitto High Volume Oil Pump
-Tomei Oil Pan Baffle
-Ross Tuffbond balancer
-ACL Race bearings
-Manley H Beam Rods
-CP Forged Pistons. 86.5mm / 9.0:1
-Tomei 1.2mm head gasket
-Kelford 272 Cams
-Kelford Valve Springs
-Tomei Adjustable Cam gears
-Nitto -10AN Head drain kit
-DC Power High Output Alternator
-Toyota MR2 Power Steering pump
-Injector Dynamics ID1000 Injectors
-Tomei Fuel Rail
-Full Race Turbo manifold, T4, Twin wastegate, Ceramic Coated
-Precision 6466 GENII Turbo, T4 in, V-band Out
-(2) Tial MV-S Wastegates
-Tial Q Blow off Valve
-CD009 Trans
-Serial 9 Shifter
-Jim Wolf Bellhousing Adapter
-Jim Wolf Adapter Flywheel
-Jim Wolf Clutch
-Wiring Specialties PRO Universal Harness
-AEM V2 ECU
-AEM Uego Wideband
-AEM Boost Gauge
-One Piece driveshaft
-Mckinney motor mounts
-4PT Welded Roll Bar

The list goes on and on. If you've made it this far, you get the idea.