FS: Redtop SR + JWT Goodies

[score]

EDIT 1/12/05: PRICE REDUCED, another time;
Price lowered. $1600 gets the motor and OEM parts, $1000 gets the JWT + Greddy stuff.

2500 gets it all!

----------------------------------------------

Im selling my SR and at this point I just want to sell it for a loss and move on. Ive spent a few thousand dollars and countless hours on it.

The head is off of the block and COMEPLETLY dissassembled. The valves have been reground, the valve seats have been reground to FSM specs, bronze valve guides from JWT have been installed in the exhaust side. The head has been checked with a straight edge and there is no warpage.

I have purchased the following parts from JWT (THEY ARE STILL IN THE BOX):
C1 Cams
Cam Sprockets
Valve Springs/Retainers
Pic can be found here.

GREDDY ROCKER ARM STOPPER KIT IS SOLD.

The engine will need an OEM gasket kit, CAS, intercooler (the one that came off of the clip had a major hole), clutch/flywheel, and filter element. Keep in mind these are parts you would likely replace during any SR swap.

The following are pictures of the parts that were left over from the clip:
parts 1
parts 2
parts 3
parts 4
parts 5
parts 6
parts 7

Not pictured is the transmission, OEM Cams, springs, and gears which come with the engine.

So $2600 for the motor and OEM parts + $1200 for the JWT and Greddy parts + $200 for the machine work. 2600 + 1200 + 200 = 4000

Im in northern California, about 30 minutes outside Sacramento. Email me at [email protected] or post questions.

More pics:
Clip as I got it
Engine + Tranny
Prior to machine work
Reground valves
Repainted valve cover

I should also note that this is posted on NICO, FreshAlloy, and NCDA.