HELP!! MAFS issues with my SR - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Stamina · 06-16-2005, 12:48 PM

Guys some how i messed up my mas yesterday. Typical signs, went today and got my KA mas and tossed it in, NO GO. I search on this forum and someone said the KA will work, i also asked on NWN and they agreed.
So....I am at the point where neither my SR nor my KA mafs wont work. All my wiring were soldered and taped. I have a ground aswell. It was working perfectly fine until i took a corner kinda hard. Is there a fuse that could be controling the masf?

ANY help will be much appreciated as there are zero sr shops where i live....i'm on my own to find out whats wrong.

the head · 06-16-2005, 01:38 PM

only the SOHC KA Maf works you just need to match up the wires on the new plug to the wires on your harness

ultraDorksGarage · 06-16-2005, 04:02 PM

check wiring splice, just try again, on an sr u had to extend the wire to reach driver side, check that extension.

second thing is check by the loom split of the tps/maf, right at the valve cover bracket ive seen wires broken there cuz we all try and stretch the harness too much.

dont forget maf need a filter, u cant run it without a filter....

goodluck

06-16-2005, 12:48 PM	#1
Stamina Leaky Injector Join Date: Jul 2003 Location: canada Posts: 89 Trader Rating: (0) Feedback Score: 0 reviews	HELP!! MAFS issues with my SR Guys some how i messed up my mas yesterday. Typical signs, went today and got my KA mas and tossed it in, NO GO. I search on this forum and someone said the KA will work, i also asked on NWN and they agreed. So....I am at the point where neither my SR nor my KA mafs wont work. All my wiring were soldered and taped. I have a ground aswell. It was working perfectly fine until i took a corner kinda hard. Is there a fuse that could be controling the masf? ANY help will be much appreciated as there are zero sr shops where i live....i'm on my own to find out whats wrong.

06-16-2005, 01:38 PM	#2
the head Nissanaholic! Join Date: Jul 2002 Location: in a dark room mastering the art of typing with one hand Posts: 2,164 Trader Rating: (3) Feedback Score: 3 reviews	only the SOHC KA Maf works you just need to match up the wires on the new plug to the wires on your harness __________________ I never knew you could do that with an eggplant

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-16-2005, 04:02 PM	#3
ultraDorksGarage Zilvia Member Join Date: Mar 2005 Location: Hawaii Posts: 204 Trader Rating: (0) Feedback Score: 0 reviews	check wiring splice, just try again, on an sr u had to extend the wire to reach driver side, check that extension. second thing is check by the loom split of the tps/maf, right at the valve cover bracket ive seen wires broken there cuz we all try and stretch the harness too much. dont forget maf need a filter, u cant run it without a filter.... goodluck