Valve cover question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Wei240 · 08-03-2006, 11:58 PM

So I stripped the bolt on redtop valve cover, yes, i summoned the power of grayskull

sucks ass, took a lot longer than i wanted to

but i got it off, and now the car will be chillin' for a bit

question is,
1. does that bolt/stud/washer looking thing/rubber that goes under washer the same as sentra's? available at u.s nissan/pepboys/kragens...?

2. since the cover is off, does valve cover gasket usually go bad, it looks okay now, but i don't really see anyone busting one, basically should i just get one now or wait until it actually bust.... what would you do...

LB.Motoring · 08-04-2006, 12:04 AM

2. If its good keep it, if its worn and old replace it, you have money in your pocket, why not replace it..

gl w/ it

Big Bronze Rim · 08-04-2006, 07:29 AM

I replaced the grommets and washers with Sentra parts so it should work fine. As for replacing the gasket, its not any big deal and if its not torn is probably wont leak, but they are not that expensive and if the car is going to be down, replacing it wouldnt hurt if you've got the money.

g6civcx · 08-04-2006, 10:29 AM

Whether you choose to replace the valve cover gasket is up to you. You should check to see if it's damaged and replace as necessary.

Also check for correct installation and apply liquid gaskets according to the FSM.

08-03-2006, 11:58 PM	#1
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	Valve cover question So I stripped the bolt on redtop valve cover, yes, i summoned the power of grayskull sucks ass, took a lot longer than i wanted to but i got it off, and now the car will be chillin' for a bit question is, 1. does that bolt/stud/washer looking thing/rubber that goes under washer the same as sentra's? available at u.s nissan/pepboys/kragens...? 2. since the cover is off, does valve cover gasket usually go bad, it looks okay now, but i don't really see anyone busting one, basically should i just get one now or wait until it actually bust.... what would you do...

08-04-2006, 12:04 AM	#2
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 38 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	2. If its good keep it, if its worn and old replace it, you have money in your pocket, why not replace it.. gl w/ it __________________ Robby Leuer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-04-2006, 07:29 AM	#3
Big Bronze Rim Zilvia Member Join Date: Jan 2006 Location: San Antonio, Texas Age: 46 Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	I replaced the grommets and washers with Sentra parts so it should work fine. As for replacing the gasket, its not any big deal and if its not torn is probably wont leak, but they are not that expensive and if the car is going to be down, replacing it wouldnt hurt if you've got the money.

08-04-2006, 10:29 AM	#4
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Whether you choose to replace the valve cover gasket is up to you. You should check to see if it's damaged and replace as necessary. Also check for correct installation and apply liquid gaskets according to the FSM.