![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() |
Ok. Heres what I did, and cant figure this out.
My car has been feelin kinda jumpy since I put a fresh pair of wires and plugs in my 240. I used NGK V-plugs, and (temporarily till my NGK wires come), I bought these Super-Magcore or SuperMag Wires from Pepboys. What is the possiblities for the car to mimic bad wires and plugs after I put fresh ones in? Thanks again . P.S. The old plugs were aged normally, no abnormal discolor or wear.
__________________
No Quote, No Cares, Just Drive. |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
WOW addicted
![]() Join Date: Dec 2001
Location: the moon
Age: 44
Posts: 6,525
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
did you make sure you put the plug wires on in the right order?? Also make sure that your got the plugs wire boots got seated good on the plugs. They should "Snap" into place.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Leaky Injector
Join Date: Feb 2002
Location: Charlotte, NC
Age: 47
Posts: 52
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Check your motor mounts. If they are gone that will cause a lack in acceleration too. Mine were shot and the motor had a lot of play. When I rev the engine the motor moved a lot to the point it was scary.
|
![]() |
![]() |
![]() |
#6 |
Leaky Injector
Join Date: Feb 2002
Location: Charlotte, NC
Age: 47
Posts: 52
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Check your motor mounts. If they are gone that will cause a lack in acceleration too. Mine were shot and the motor had a lot of play. When I rev the engine the motor moved a lot to the point it was scary.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|