SSR Watanabe RS8 16x7, 16x8 Gunmetal/Polished lip - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

the tech · 07-08-2004, 09:41 AM

I am selling my SSR Watanabe RS8 wheels off my 4 lug. Wheels are 16x7 and 16x8. Tires are 205 front and 225 rear Kumho 711. Tread still has about 80-90% all around. They are Gunmetal with a polished lip. I have pics but they are too big to attach here. You can EMAIL ME for pics. Local Socal pickup preferred. Will take cash or trades depending on what you have.

TheTimanator · 07-08-2004, 09:50 AM

what is the offset??

the tech · 07-08-2004, 10:02 AM

I don't know the offset. They are on my car now though, so I know fitment is not an issue.

mistaanime · 07-08-2004, 10:09 AM

wut part of cali?

Wei240 · 07-08-2004, 10:20 AM

i think people still would like to know the offset if they clear stuff... i would hope there's some type of imprint on the wheel itself indicating the specs...

what kind of trades do you have in mind?

the tech · 07-08-2004, 10:36 AM

Quote:

Originally Posted by mistaanime

wut part of cali?

Im in Socal. Whittier.

the tech · 07-08-2004, 10:36 AM

Quote:

Originally Posted by Wei240

i think people still would like to know the offset if they clear stuff... i would hope there's some type of imprint on the wheel itself indicating the specs...

what kind of trades do you have in mind?

They are 4 lug. They clear all coilovers.

rainier · 07-08-2004, 12:04 PM

how much are you looking to sell these for

the tech · 07-08-2004, 01:19 PM

Quote:

Originally Posted by rainier

how much are you looking to sell these for

I don't have a set price yet cause I'm trying to see what these usually go for. Make a reasonable offer and we can go from there.

ucfz31s13 · 07-08-2004, 01:33 PM

lots of wheels will clear coilovers, but wont sit out flush enough for driver preference.

whats the offset.

the tech · 07-08-2004, 01:51 PM

Quote:

Originally Posted by ucfz31s13

lots of wheels will clear coilovers, but wont sit out flush enough for driver preference.

whats the offset.

I don't know the exact offset. There are no visible stickers on the inside of the wheels to tell me what it is.

kazuo · 07-08-2004, 01:57 PM

Here is how to measure your wheel to find the offset.

http://www.tirerack.com/wheels/tech/offset.htm

This is important to know for a variety of reasons that others have pointed out.

Once ya find out post up and let us know

the tech · 07-08-2004, 03:02 PM

There is no way for me to figure out the offset without taking the tire off. The pic clearly shows that in order to find the center, you need to measure from the inside lip to the outside lip. This can only be done with the tire off the wheel. If you can find an easier way for me to find out the offset, I'm game.

I've also tried looking at the rim itself to try and figure out if there is a way to do it with the tire on. Best I would be able to do is make some sort of close call on it.

The wheels are currently on my car, so I'd have to take them off to try to get this measurement.

s13drift240sx · 07-08-2004, 03:11 PM

So whats the condtion of the rims. You willing to let them go for $300 or whats your price im loooking for some rims. I live in la puente and got the monis. Can you send me some pics. [email protected]

the tech · 07-08-2004, 03:26 PM

Quote:

Originally Posted by s13drift240sx

So whats the condtion of the rims. You willing to let them go for $300 or whats your price im loooking for some rims. I live in la puente and got the monis. Can you send me some pics. [email protected]

I answered your PM. Not looking to let them go for that low price. If that's all they're worth, I will end up keeping them for track wheels.

the tech · 07-08-2004, 03:58 PM

If anyone wants to see some pics, I uploaded some to the readers ride section on 240sx.org. I use the same screename there.

TheTimanator · 07-08-2004, 04:08 PM

http://www.nissaninfiniticlub.net/ph...0&ppuser=15429

the tech · 07-08-2004, 04:49 PM

Thanks bro!

reccakun08 · 07-08-2004, 05:05 PM

i doubt it but will these clear the 300zx brakes?

the tech · 07-08-2004, 06:51 PM

Quote:

Originally Posted by reccakun08

i doubt it but will these clear the 300zx brakes?

These are 4 lug.

Jhay · 07-08-2004, 07:40 PM

Quote:

Originally Posted by the tech

These are 4 lug.

Doesnt matter if its 4, 5 or 10 lug...offset will verify if it can..which alot of people are asking for..do you not know the offset?

Wei240 · 07-09-2004, 01:09 AM

i don't think offsets can tell you wheter it clears everything (it's either coils or zbrakes, it depends on spoke design...), but either case, about how much are you looking for?

the tech · 07-09-2004, 09:09 AM

Quote:

Originally Posted by Jhay

Doesnt matter if its 4, 5 or 10 lug...offset will verify if it can..which alot of people are asking for..do you not know the offset?

No, I don't know the offset.

the tech · 07-09-2004, 09:09 AM

Quote:

Originally Posted by Wei240

i don't think offsets can tell you wheter it clears everything (it's either coils or zbrakes, it depends on spoke design...), but either case, about how much are you looking for?

I don't have a set price really yet.

*exitspeed* · 07-09-2004, 10:22 AM

Would you take $400. Sorry if thats a little low but I'd just like to through it out there.

the tech · 07-09-2004, 10:33 AM

Quote:

Originally Posted by exitspeed

Would you take $400. Sorry if thats a little low but I'd just like to through it out there.

Nah too low. Thanks!

sspikey · 07-09-2004, 10:55 AM

what are you looking for around 500?
i NEED to know the offset too because these would go on a 510

please email me pics too
[email protected]

thank you

the tech · 07-09-2004, 11:53 AM

Quote:

Originally Posted by sspikey

what are you looking for around 500?
i NEED to know the offset too because these would go on a 510

please email me pics too
[email protected]

thank you

I'd love to get the offsets for everyone who is interested if there is a simple way to figure it out.

So everyone who is interested knows, the offer that I have on the wheels now is a trade for a power fc. So, I would guess that $500 is not going to get the sale done.

Black240sx · 07-09-2004, 01:08 PM

If you don't know the offset then take a picture fromt he side of yur car...

A close-up of the wheel from a side angle...

then people will be able to see if the wheels are fluch or sunken in!!!!

the tech · 07-09-2004, 02:52 PM

I just added four more pics to the gallery section on this site.

http://www.zilvia.net/photo/showgall...0&ppuser=22988

07-08-2004, 09:41 AM	#1
the tech Zilvia Junkie Join Date: Mar 2004 Location: CA Posts: 443 Trader Rating: (1) Feedback Score: 1 reviews	SSR Watanabe RS8 16x7, 16x8 Gunmetal/Polished lip I am selling my SSR Watanabe RS8 wheels off my 4 lug. Wheels are 16x7 and 16x8. Tires are 205 front and 225 rear Kumho 711. Tread still has about 80-90% all around. They are Gunmetal with a polished lip. I have pics but they are too big to attach here. You can EMAIL ME for pics. Local Socal pickup preferred. Will take cash or trades depending on what you have.

07-08-2004, 09:50 AM	#2
TheTimanator Post Whore! Join Date: Apr 2002 Location: Nashville Age: 41 Posts: 2,535 Trader Rating: (1) Rides Gallery: TheTimanator Feedback Score: 1 reviews	what is the offset?? __________________ 89 S13 hatch/////98 Subaru 2.5RS

07-08-2004, 10:09 AM	#4
mistaanime Nissanaholic! Join Date: Mar 2003 Location: Nine -1- Six Posts: 1,934 Trader Rating: (1) Feedback Score: 1 reviews	wut part of cali? __________________ -Cherry Red 91 Silfourty-

07-08-2004, 12:04 PM	#8
rainier Nissanaholic! Join Date: Mar 2003 Location: San Diego / Santa Ana Age: 37 Posts: 2,093 Trader Rating: (0) Feedback Score: 0 reviews	how much are you looking to sell these for __________________

07-08-2004, 04:08 PM	#17
TheTimanator Post Whore! Join Date: Apr 2002 Location: Nashville Age: 41 Posts: 2,535 Trader Rating: (1) Rides Gallery: TheTimanator Feedback Score: 1 reviews	http://www.nissaninfiniticlub.net/ph...0&ppuser=15429 __________________ 89 S13 hatch/////98 Subaru 2.5RS

07-08-2004, 10:02 AM	#3
the tech Zilvia Junkie Join Date: Mar 2004 Location: CA Posts: 443 Trader Rating: (1) Feedback Score: 1 reviews	I don't know the offset. They are on my car now though, so I know fitment is not an issue.

07-08-2004, 10:20 AM	#5
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	i think people still would like to know the offset if they clear stuff... i would hope there's some type of imprint on the wheel itself indicating the specs... what kind of trades do you have in mind?

07-08-2004, 01:33 PM	#10
ucfz31s13 Zilvia Junkie Join Date: Jun 2003 Location: Orlando, Florida Posts: 345 Trader Rating: (0) Feedback Score: 0 reviews	lots of wheels will clear coilovers, but wont sit out flush enough for driver preference. whats the offset.

07-08-2004, 01:57 PM	#12
kazuo Post Whore! Join Date: Aug 2002 Location: Posts: 2,762 Trader Rating: (3) Feedback Score: 3 reviews	Here is how to measure your wheel to find the offset. http://www.tirerack.com/wheels/tech/offset.htm This is important to know for a variety of reasons that others have pointed out. Once ya find out post up and let us know

07-08-2004, 03:02 PM	#13
the tech Zilvia Junkie Join Date: Mar 2004 Location: CA Posts: 443 Trader Rating: (1) Feedback Score: 1 reviews	There is no way for me to figure out the offset without taking the tire off. The pic clearly shows that in order to find the center, you need to measure from the inside lip to the outside lip. This can only be done with the tire off the wheel. If you can find an easier way for me to find out the offset, I'm game. I've also tried looking at the rim itself to try and figure out if there is a way to do it with the tire on. Best I would be able to do is make some sort of close call on it. The wheels are currently on my car, so I'd have to take them off to try to get this measurement.

07-08-2004, 03:11 PM	#14
s13drift240sx Zilvia Member Join Date: Mar 2004 Location: California Posts: 227 Trader Rating: (0) Feedback Score: 0 reviews	So whats the condtion of the rims. You willing to let them go for $300 or whats your price im loooking for some rims. I live in la puente and got the monis. Can you send me some pics. [email protected]

07-08-2004, 03:58 PM	#16
the tech Zilvia Junkie Join Date: Mar 2004 Location: CA Posts: 443 Trader Rating: (1) Feedback Score: 1 reviews	If anyone wants to see some pics, I uploaded some to the readers ride section on 240sx.org. I use the same screename there.

07-08-2004, 04:49 PM	#18
the tech Zilvia Junkie Join Date: Mar 2004 Location: CA Posts: 443 Trader Rating: (1) Feedback Score: 1 reviews	Thanks bro!

07-08-2004, 05:05 PM	#19
reccakun08 Zilvia FREAK! Join Date: Jun 2003 Location: Rockville, Maryland Age: 39 Posts: 1,090 Trader Rating: (5) Feedback Score: 5 reviews	i doubt it but will these clear the 300zx brakes?

07-09-2004, 01:09 AM	#22
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	i don't think offsets can tell you wheter it clears everything (it's either coils or zbrakes, it depends on spoke design...), but either case, about how much are you looking for?

07-09-2004, 10:22 AM	#25
exitspeed aWingThing.com Join Date: Mar 2003 Location: Milwaukee, WI Age: 44 Posts: 20,900 Trader Rating: (1) Feedback Score: 1 reviews	Would you take $400. Sorry if thats a little low but I'd just like to through it out there. __________________ What I do for a living...www.mhrussell.com

07-09-2004, 10:55 AM	#27
sspikey Zilvia Junkie Join Date: Dec 2001 Posts: 394 Trader Rating: (0) Feedback Score: 0 reviews	what are you looking for around 500? i NEED to know the offset too because these would go on a 510 please email me pics too [email protected] thank you __________________ keeping it sideways cuz im too fast to drive straight.

07-09-2004, 01:08 PM	#29
Black240sx Zilvia Junkie Join Date: Oct 2002 Location: H-Town, TX Age: 45 Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	If you don't know the offset then take a picture fromt he side of yur car... A close-up of the wheel from a side angle... then people will be able to see if the wheels are fluch or sunken in!!!!

07-09-2004, 02:52 PM	#30
the tech Zilvia Junkie Join Date: Mar 2004 Location: CA Posts: 443 Trader Rating: (1) Feedback Score: 1 reviews	I just added four more pics to the gallery section on this site. http://www.zilvia.net/photo/showgall...0&ppuser=22988