Ka24E tranny gears in Ka24DE bellhousing - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Rockingcorey · 08-05-2013, 12:59 PM

I just bought my first s13 hatch and it grinds 2nd. I was givin a tranny with the car but it turns out to be a SOHC tranny. Can i just swap the gears form the SOHC trany to the DOHC housing?

IROYLE1 · 08-05-2013, 01:48 PM

No need. Just use the Sohc trans.

Rockingcorey · 08-05-2013, 06:45 PM

The SOHC trans bolts are snapped off in the tranny for the reverse switch and i believe its the crank angle sensor that the SOHC trans doesnt have and i really dont want any check engine lights on if it as easy as swapping over the gears.

08-05-2013, 12:59 PM	#1
Rockingcorey Join Date: Nov 2009 Location: NH Age: 31 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Ka24E tranny gears in Ka24DE bellhousing I just bought my first s13 hatch and it grinds 2nd. I was givin a tranny with the car but it turns out to be a SOHC tranny. Can i just swap the gears form the SOHC trany to the DOHC housing?

08-05-2013, 01:48 PM	#2
IROYLE1 Zilvia Member Join Date: Jan 2010 Location: az Posts: 268 Trader Rating: (3) Feedback Score: 3 reviews	No need. Just use the Sohc trans.

08-05-2013, 06:45 PM	#3
Rockingcorey Join Date: Nov 2009 Location: NH Age: 31 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	The SOHC trans bolts are snapped off in the tranny for the reverse switch and i believe its the crank angle sensor that the SOHC trans doesnt have and i really dont want any check engine lights on if it as easy as swapping over the gears.