|
South Western States Arizona, California, Hawaii, and Nevada. |
|
Thread Tools | Display Modes |
12-29-2010, 06:35 PM | #1 |
Zilvia Member
|
sockets needed ASAP
Im in the step of pressing out my compression arm bushings for 350z.
I need these sockets to go on sears p/n 47754 = 1-11/16 sears p/n 47793 = 2-3/8 If anyone has these, could i please borrow them? i'll pick them up from you. I can drive anywhere near costa mesa, santa ana, irvine, westminster, fountain valley and orange area. OR I need: Driver - 2.25" Out side diameter with 1/8 wall x 1.5 inch tall. Receiver - 3.0" Out side diameter with 1/4 wall x 2.5 inch tall. Flat plate to span across - 2"x3"x1/4" thick plate is fine. Here's what i need to do: DIY - SPL Compression Rod Bushing Install - MY350Z.COM Forums Thanks guys
__________________
FS: (4) NEW 17x8.5 +40 Gram Lights 57s GOLD 5x114.3 |
Sponsored Links |
12-29-2010, 06:51 PM | #3 |
Zilvia Member
|
because they cost too much for one time use..
I don't know any neighbor who has them. if I did, I wouldn't have posted here
__________________
FS: (4) NEW 17x8.5 +40 Gram Lights 57s GOLD 5x114.3 |
12-30-2010, 11:59 AM | #4 |
Zilvia FREAK!
Join Date: Mar 2010
Location: (909)
Age: 35
Posts: 1,055
Trader Rating: (6)
Feedback Score: 6 reviews
|
Autozone might gave them give them a call and see if they have that loan a tool thing even kragen/O'reileys
__________________
Hachiroku, ATTACK! ATTACK! ATTACK!!! |
Bookmarks |
|
|