![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Junkie
![]() |
My 89 s13 is having a problem with the check engine light. It came on after I replaced the alternator and put in a new battery.
I pulled the ecu and read the code, it returned code 55. So I figured this was some sort of a once in a blue moon occurance. Having said that, I reset the ECU. The light cleared. I drove it for a day and the light came back on several hours later. The car is running great (as great as can be for a 175K car =P). I didn't notice any changes in performance, although my mileage seems to be degrading. I have used up a quarter tank and only show 80miles elapsed on the gauge. I've recently changed the following: spark plug wires basic tune up, includes air filter, crackcase filter, oil filter, fuel filter MAF head temperature sensor coolant temperature sensor water pump thermostat oxygen sensor alternator battery What do you think could be causing this problem? Bad engine/chassis ground? Bad ecu? I mean, the car runs fine but hate that #### light! Any help would be appreciated... |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Guest
Posts: n/a
|
maybe this will help? :confused:
Code # Description 12 Air flow meter circuit 13 Engine temperature sensor circuit 14 Vehicle speed sensor circuit 31 E.C.U. (E.C.C.S. control unit) 32 EGR function 33 Exhaust gas O2 sensor circuit 35 Exhaust gas temperature circuit 43 Throttle position sensor circuit 45 Injector leak For Non-California Models: RED L.E.D. ON = The ECU's CPU or the Crank Angle sensor is malfunctioning. __________________________________________________ ____ Mode II (Engine OFF)- Stored Self Diagnostic Results Code # Description 11 + Crank angle sensor circuit 12 E Air flow meter circuit 13 E Engine temperature sensor circuit 14 E Vehicle speed sensor circuit 21 + Ignition signal circuit 31 E E.C.U. (E.C.C.S. control unit) 32 * E EGR function 33 E Exhaust gas O2 sensor circuit 34 Detonation sensor circuit 35 * E Exhaust gas temperature circuit 43 E Throttle position sensor circuit 45 * E Injector leak 54 Signal circuit from A/T control unit to ECU (A/T only) 55 No malfunction in the above circuits |
![]() |
![]() |
#3 |
Zilvia Junkie
![]() |
Thanks for the code chart, but the code returned was 55. So it leads me to believe that nothing is wrong, however the light still comes back on.
I may disconnect the battery for more then 12hrs to do a *hard* reset. |
![]() |
![]() |
![]() |
#4 |
Nissanaholic!
![]() Join Date: Jun 2001
Location: Broken Arrow, OK
Age: 48
Posts: 1,814
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
If your CEL keeps coming on, but it's throwing a 55 code, I would actually suggest taking it to the shop. There's something odd that's making your CEL come on. Mine came on once after I bogged the car one night, but was throwing a 55, and it never came back on after I reset it. Has this been happening since you replaced the O2 sensor or the MAF? Or was it happening before? It seems that maybe one of the parts you replaced needs to be adjusted or is possibly faulty, since you're commenting on bad gas mileage also.
|
![]() |
![]() |
![]() |
#5 |
Nissanaholic!
![]() Join Date: Jul 2001
Location: St. Louis
Age: 45
Posts: 2,263
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
ouch code 55 that's gonna cost you. actually i could have swore 55 means every thing is gonna be alright. everything's gonna be alright now, everything's gonna be alright.
|
![]() |
![]() |
![]() |
#6 |
Zilvia Junkie
![]() |
I know this is really strange. I am going to try to reset the ecu again and see what happens. Also, when I do the reset procedure, does the screw have to be returned to the fully clockwise position?
|
![]() |
![]() |
![]() |
#7 | |
Leaky Injector
![]() |
Quote:
Fuck dead thread, threads older than 1 year should be archived, wtf.
__________________
1991 240sx Hatchback 5spd |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|