S14 parts to s13? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

brainfood · 03-20-2006, 03:28 PM

I was wondering what aftermarket parts swap over. I know my battleversion rods will all transfer except the rear toe rods. Will the tie rods and outers work? My main concern was s14 coilovers on an s13 I am almost possitive the fronts will work what about the rears? The differential is interchangable if I swap the whole hoising and axels I think. What is I swap the whole rear subframe would it bolt up and would I be able to use the coilovers in the rear and the rear toe rods? Just curious as I might be swaping parts over to my s13 hatch chassis.
Thanks!

projectRDM · 03-20-2006, 03:33 PM

You been here two years and you're asking this?

Toe rods are the same, it's the tension rods that are different, by one inch. Some adjustable tension rods have enough thread to make up the difference.
Tie rods, all the rear arms, and axles swap over. LCA is 15mm shorter on S13 and won't fit the S14 spindle.
Subframe is narrower than S14, won't fit. S14 shock is twice as long as the S13 shock, won't work.

All this is common, beaten to death information you could have found in 10 seconds without having to read through my post.

03-20-2006, 03:28 PM	#1
brainfood Post Whore! Join Date: Jun 2004 Location: Eagle Rock, CA Age: 42 Posts: 2,957 Trader Rating: (18) Feedback Score: 18 reviews	S14 parts to s13? I was wondering what aftermarket parts swap over. I know my battleversion rods will all transfer except the rear toe rods. Will the tie rods and outers work? My main concern was s14 coilovers on an s13 I am almost possitive the fronts will work what about the rears? The differential is interchangable if I swap the whole hoising and axels I think. What is I swap the whole rear subframe would it bolt up and would I be able to use the coilovers in the rear and the rear toe rods? Just curious as I might be swaping parts over to my s13 hatch chassis. Thanks! __________________ Bryan Rogers http://www.seriousbadass.com

03-20-2006, 03:33 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You been here two years and you're asking this? Toe rods are the same, it's the tension rods that are different, by one inch. Some adjustable tension rods have enough thread to make up the difference. Tie rods, all the rear arms, and axles swap over. LCA is 15mm shorter on S13 and won't fit the S14 spindle. Subframe is narrower than S14, won't fit. S14 shock is twice as long as the S13 shock, won't work. All this is common, beaten to death information you could have found in 10 seconds without having to read through my post.