![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
|
![]() I hope some one can help me. I went on Heavy Throttle and other sites for wiring. From sr harness to ka harness all colors match up except the Blk/red stripe & Blu/red strip from sr going to the blk/red stripe on the ka.
so here is the problem, on the ka harness there are 2 green wires one w/ an orange stripe and one with yellow. On the sr harness there is one with an orange stripe and TWO with a yellow stripe. which one gets connected or do both of them? I just started putting together now I find there is a THICK blue/red stripe wire (see above) and a THIN blue/red stripe coming from the sr harness. Same situation. Which one or do both get wired together? Thanks |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Zilvia FREAK!
![]() |
i had the same problem as you....well only the greens didnt match up for me...i followed everything heavy throttle told me to do and i had the green left over and blues iirc.... i been running my car like that for a while now...so i guess its not important... i think it might have to do w/ a/c tho...on heavy throttles site i think it says that it tells you what wires to connect to get your car running
|
![]() |
![]() |
![]() |
#4 | |
Leaky Injector
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|