300zx brakes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

02-19-2002, 01:23 PM

Are the brake master cylinder on a 89-90 and the 91-up s13 models the same.  The reason I'm asking is because I'm thinking about what I would need to install 300zx brakes.  I'm not sure about the 240sx but I know on a silvia if you have a zenki model it was recomended that you use the brake disk from the 300zx and also the master cylinder from a kouki model silvia.  I'm thinking maybe I'll do this conversion if its not too expensive.  Also do you recommend doing this mod or just get higher performance break pads.  I don't plan on having this car at the tracks everyday  so I don't want to do this If I'm not going to go over the limits of the stock break system..

02-19-2002, 01:23 PM	#1
Guest Posts: n/a	Are the brake master cylinder on a 89-90 and the 91-up s13 models the same.  The reason I'm asking is because I'm thinking about what I would need to install 300zx brakes.  I'm not sure about the 240sx but I know on a silvia if you have a zenki model it was recomended that you use the brake disk from the 300zx and also the master cylinder from a kouki model silvia.  I'm thinking maybe I'll do this conversion if its not too expensive.  Also do you recommend doing this mod or just get higher performance break pads.  I don't plan on having this car at the tracks everyday  so I don't want to do this If I'm not going to go over the limits of the stock break system..