![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() Join Date: Jun 2005
Location: San Mateo CA/Northridge, CA
Age: 40
Posts: 186
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
![]() I had to give my VIN number to the dealer to get the part number to get O2 sensors for my car. Is there different O2 sensors for s14's? What would happen if I get a O2 sensor from somone else but its still plugs in? I have a 96 240sx and its a California car if that matters.
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Zilvia Addict
![]() |
Arian..Yep there are different O2 sensors for the S14. Early production model S14's, (March/April 94's), had a one wire 02 sensor. Later model 95's & some 96's switched over to a three wire 02 sensor. Don't quote me on this, but I think 97-98 model years either used the same three wire O2 sensor or switched over to a four wire sensor...can't remember...not sure though. Haven't seen an 97-98 O2 sensor in over a year & a half.
Anyhow, click on the attached link to learn about the difference between the one wire & three wire O2 sensor: http://www.dnd-automotive.com/tuneup/02-sensor.htm ID PS: Almost forgot, if it plugs in & works then you are okay. You can test your O2 sensor by putting your ECU into Diagnostic Mode....you'll need a Factory Service Manual, (FSM) for that. Use the SEARCH function here on Zilvia.Net to find & download a free FSM for your S14.
__________________
Weekend Mechanic for my Not-So-Mechanically-Inclined buddies.... ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|