AVCR rpm problem read manual and searched

[Delearious02]

Hey guys i hooked up my AVCR today and everything works except for the rev when im at idle it says im at 220 rpm or so... i test most of the features i could speed and throttle and they are accurate. I went back over my wireing and its sucure and i searched and i still cant find any help.... anyone have any advice? 240 w/ redtop 63 ecu

[IngS14]

wrong wire on the ecu REV pin out,maybe 63 is different than 62??check your manual instruction for the 63 ecu.

[yokotas13]

mine does the same thing, I juts use my SAFC for it and do manual boost control with it

[Delearious02]

Originally Posted by IngS14

wrong wire on the ecu REV pin out,maybe 63 is different than 62??check your manual instruction for the 63 ecu.

if it was the wrong wire why would i get somewhat of a signal? and i dont think the ecu has much to do with it, i dunno why i said i had a 63 i have hooked up several ecus to my car and it worked fine 62 and another 4b? (i think it was 4b or somthing) but thanks for the idea.... guess ill still search out some more or call apexi.