i effed up :'(

[impulze240sx]

ok well i was leaving a friends house he lives like in the middle of no where so i was driving kinda fast, i was coming up to a signal gettin ready to make a turn and i was accelerating thru out the whole turn cause i like to peel out well this time i went to fast and i just noticed all the water so i started turning too much pushed the brakes turned the other way and my 240 just thru all the weight to the other side and my back tire hit the curb and i bent something because my right tire sticks out on top and my left tire is kinda high so i noticed that the bottom A bars are bent
so this might be the end of my s13 if the frame is bent

[Rayne]

Could be....take it to a body shop and they may be able to straighten the frame out.

You lived it least. Take the accident as a lesson on how not to drive while you are out on the streets.

[ThatGuy]

So basically it seems like you are an idiot who doesnt know how puncuate and drives like a dumbass and now youve fucked up your car so if you want to slow down for second and type out using actual sentence structure and proper punctuation then perhaps you will get more help.


Not very nice to try and read, is it? Slow down, type correctly, and don't drive like a dumb fuck in the future.

[TKfoshori]

sell your car, buy a fwd car, and slow down. let me guess your car is stock?

[fliprayzin240sx]

and this belongs in TECH because why??? The only TECHNICAL input i can say is you, sir is an IDIOT...nuff said

[Phlip]

manItriedreadingthatfirstpostandthelackofpunctuati onmadethatshitimfuckinpossibletoread.
whatIthinkIgotfromitwasthatsometoolwasdrivinglikea fuckingtoolandgothisjustduecomeuppance.

All jokes aside, driving like a douche, you usually get what YOU deserve, but unfortunately for the rest of us, another S-Chassis has to bear the punishment of the driver's jackassery.

[SimpleS14]

Damn that's a long run-on sentence. It's kind of hard to chiper what exactly happened to your car, but lets hope you only messed up a suspension component. Jack up the car and take a good look at it.

[NemeGuero]

Good job! YaaaaYY Takumi!

[420sx]

hmmm.....




you


fucked


up!

[samplesurf]

yeah u did something stupid, been there before not paying attention, long story short your frame should be ok what probably happened like it did to me was, bent lower control arm slightly tore my subframe, yours might be ok, and busted that side axle, go to the junkyard

[impulze240sx]

yeah thanks for all the help assholes.
well anyway took it to my friends shop and what do u know lower control arm is bent. anyways 75 bucks at junkyard so its good as new. man i never knew people on these forums were such ass holes so much flamming seriously you act like you never fucked up in ur life, FUCK YOU ASS HOLES!

[McRussellPants]

if it were anything other than a bonestock pignose I might care more.

[Mr. H]

you guys really are being kinda harsh. after the first 2 your a idiots, i think he had gotten the point. Not to mention that he titled the post "I effed up :'(." Also why are you talking down at him because his car is stock?

[articdragon192]

+1 on getting what you deserve, Drive sanely on the streets, especially on city streets. Plus, if I recall, you're a young driver aren't you? It's guy like you that give 240 drivers, especially the younguns, bad reputation. Don't expenct sympathy becuasesomething bad happened while you were doing somethign stupid. it's like asking for sympathy when you get caught street racing. Not gonna happen. Welcome to reality.

[qwikspool]

live and learn. dont do stupid things on public street.

[Irukandji]

Look at your thread title.... Don't expect any sympathy after telling us you crashed while wrecklessly driving on public roads. It's like saying you have an STD and expecting girls to sleep with you.

[LukeDogg316]

[infinitexsound]

alignment shop... take it to them... theyll try to re align it.. if somethings bent.. theyll tell u.. other then that.. use ur common sense...

[cotbu]

First of all, You need to be committed when you do things in you car! That water should have never stopped you! Second never slam on your breaks unless you have abs! Steer through it light breaking is ok, but not in water. What you should have done was drive like your being followed by the police in an invisible supercharged pus-stang.

[TipStylez]

Im surprised you expected sympathy from us.

Do you want a cookie because you didnt know how to drive a rwd car?

Plus, you knew that road and how sharp the turn was. You should of used your head and told yourself "hey, if theres water here...THERE SHOULD BE SOME THERE!, i should slow down..."

And who the hell peels out through a turn because it sounds cool?! You would of made it if you tryed to "Drift" the corner, rather you tryed to grip it but at the same time...lose grip because it sounds cool.

If you really want the lil peal out sound...weld your diff and disconnect your rear calipers.

And what the hell is a A Bar?

[180sExy]

y is it mostly noobs with stock ass 240's fuckin up their cars.man these lame asses where i live drive bone ass stock 240 an swear their mister DK =/ hurts my heart when i see a 240 get fucked up by a dumb ass.i feel sorry for the car an not you.

[Dream240]

Originally Posted by impulze240sx

ok well i was leaving a friends house he lives like in the middle of no where so i was driving kinda fast, i was coming up to a signal gettin ready to make a turn and i was accelerating thru out the whole turn cause i like to peel out well this time i went to fast and i just noticed all the water so i started turning too much pushed the brakes turned the other way and my 240 just thru all the weight to the other side and my back tire hit the curb and i bent something because my right tire sticks out on top and my left tire is kinda high so i noticed that the bottom A bars are bent
so this might be the end of my s13 if the frame is bent

You say you're tire is high? What does that mean? You weren't feeding your tires crack again were you?? tsk tsk tsk....
Anyways....the rear subframe might be a little tweaked. After you replace the arm and whatever else you noticed was bent, get an alignment. If the alignment doesn't come out straight (it prolly won't) then outsource a rear subframe from a salvage yard. That should do the trick.

Oh....and you're an idiot.
As the great Jim Carrey once said..... "STOP BREAKING THE LAW ASSHOLE!!!"

[sweet89s13]

My,my,my. Do not put this thread in the tech section. I made this mistake not on wrecking but on something other than tech, and rightfully ive been flamed, and tore apart. Will not happen again, but anyways this should ethier be locked or put in the right section. We never got the answer for what an "a" bar is. I want to know.

[ThatGuy]

There is no right section for acting like an idiot and expecting sympathy. Oh wait, maybe there is.

Click Here!