sr power steering - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

koukidrifter21 · 12-18-2006, 01:54 PM

ok guys i need some help here!!! i have a 1990 240 with an sr in it, but no power steering. i have the dohc pressure line and the hard lines and the reservoir. but on the sr pump there are two wholes were either the pressure line or the return line goes, i dont know wich one goes where, and i dont have a return line some one please give me a diagram setup or some pics of your own sr power steering setups thanks

koukidrifter

HalveBlue · 12-18-2006, 02:03 PM

SR Power Steering woes FTW!

The pressure line is connected to an elongated metal hose via a banjo bolt. That elongated hose, in turn, connects to the PS pump via another banjo bolt.

The suction pipe (curved, metal piece) connects the PS pump to the PS resevoir via a rubber hose.

Hopefully that made sense and helps.

Good Luck!

koukidrifter21 · 12-18-2006, 02:42 PM

but what about the other spot on the pump(the whole on the right)what goes in it?????????

GR8WHITE · 12-18-2006, 02:50 PM

the hole on the top is where the high pressure hose connects with the large bolt with the two crush washers, and where the hole on the side is should have a curved metal tube attached to it by two bolts and that is the return line that should have a piece of hose attached to it with a hose clamp.

koukidrifter21 · 12-18-2006, 03:16 PM

now im really confused!! someone send me some pics of what ur talkin about

*ManoNegra* · 12-18-2006, 04:39 PM

here's an idea: why don't YOU post pics so that we know what YOU are talking about and perhaps help you out.
also the FSMs are readily available if you search.

12-18-2006, 01:54 PM	#1
koukidrifter21 Leaky Injector Join Date: Oct 2006 Location: savannah, ga. Age: 38 Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	sr power steering ok guys i need some help here!!! i have a 1990 240 with an sr in it, but no power steering. i have the dohc pressure line and the hard lines and the reservoir. but on the sr pump there are two wholes were either the pressure line or the return line goes, i dont know wich one goes where, and i dont have a return line some one please give me a diagram setup or some pics of your own sr power steering setups thanks koukidrifter

12-18-2006, 02:42 PM	#3
koukidrifter21 Leaky Injector Join Date: Oct 2006 Location: savannah, ga. Age: 38 Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	??????? but what about the other spot on the pump(the whole on the right)what goes in it?????????

12-18-2006, 02:03 PM	#2
HalveBlue Zilvia FREAK! Join Date: Mar 2004 Location: I'm somewhere where I don't know where I am! Posts: 1,549 Trader Rating: (0) Feedback Score: 0 reviews	SR Power Steering woes FTW! The pressure line is connected to an elongated metal hose via a banjo bolt. That elongated hose, in turn, connects to the PS pump via another banjo bolt. The suction pipe (curved, metal piece) connects the PS pump to the PS resevoir via a rubber hose. Hopefully that made sense and helps. Good Luck!

12-18-2006, 02:50 PM	#4
GR8WHITE Leaky Injector Join Date: May 2006 Location: CA Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	the hole on the top is where the high pressure hose connects with the large bolt with the two crush washers, and where the hole on the side is should have a curved metal tube attached to it by two bolts and that is the return line that should have a piece of hose attached to it with a hose clamp.

12-18-2006, 03:16 PM	#5
koukidrifter21 Leaky Injector Join Date: Oct 2006 Location: savannah, ga. Age: 38 Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	now im really confused!! someone send me some pics of what ur talkin about

12-18-2006, 04:39 PM	#6
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	here's an idea: why don't YOU post pics so that we know what YOU are talking about and perhaps help you out. also the FSMs are readily available if you search.