New 240 car.. Cluster Problems!?! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

chasekeaton · 02-22-2007, 11:24 AM

Hey guys, im new, i have had 20 drag hondas, and i am finally switching to nissan. so hello all!

I bought a 90 SE last night, pretty much for the good body.

The cluster's HUD doesnt work, Gas Gage doesnt work, and the trip and odo (so who really know what the miles are, kinda sucks) doesnt work.

What should i do? go ahead and get the jdm cluster? or do you think they are other issues in the car that need to be fixed, or is the cluster just shot?

Thanks Chase!!

Dream240 · 02-22-2007, 11:27 AM

A JDM cluster is not what you need. Check fuses. If those are good source out a used HUD cluster from eGay...

welcome.

chasekeaton · 02-22-2007, 11:30 AM

Why not the jdm cluster to just by pass the little HUD thing? or is the HUD thing preatty cool? i wouldnt know i have never been in on, until mine last night and it doesnt work.

I will jump on those fuses right now! Thanks for the info

Taniguchi_Is_#1 · 02-22-2007, 11:36 AM

HUD is cool. i miss mine. but yeah, if you don't care, just get an analog cluster. you'll have to get the analog sub-harness also, though, because the HUD sub-harness is different.

Dream240 · 02-22-2007, 11:54 AM

HUD is bleh....most times it's just distracting. Just get a replacement analog if it is in fact your guages. Also after you check the fuses (driver side kick panel) I would pull the guages out and just check to see if they're plugged in!

Could be that the previous owner was trying to keep the mileage down and unplugged them......

CA18_S13 · 02-22-2007, 12:06 PM

Hud is good if you don't like looking down at the needle and its just digital display of mph you run. But you can switch to km/h if you want. I love my hud when i go drifting especially with my helmet on.

chasekeaton · 02-22-2007, 03:02 PM

i am in class right now, and i have not really gotten the chance to glance at the cluster and see how hard it is to remove.

so how hard is it to remove? does the dash have to come out?

Dream240 · 02-22-2007, 03:29 PM

Quote:

Originally Posted by chasekeaton

i am in class right now, and i have not really gotten the chance to glance at the cluster and see how hard it is to remove.

so how hard is it to remove? does the dash have to come out?

1. Remove the driver side kick panel and door sill.
2. Remove the lower dash piece under the steering column (6 bolts)
3. Remove the steering wheel surround trim (6 screws)
4. Loosen the back two steering column nuts till they're almost off, but dont take them off! <=important (12mm)
5. Remove the two front bolts holding the steering column up. (12mm)
6. Lower steering column until it comes to rest on the two nuts in the back.
7. Remove screws holding the guages in. (2 screws)
8. Carefully tug at the guage trim by the black plastic area until it pops out.
9. Carefully disconnect all the switches on the backside of the trim panel.
10. Remove the screws holding guage cluster (3 screws)
11. Pull the cluster out and disconnect the 3 connectors on the back.
12. Done, reverse order for re-install.

Hope this helps.

SimpleSexy180 · 02-22-2007, 03:05 PM

its just a bunch of small screws and a few bolts.

dash doesnt have to come out to get the cluster.

the plastic trim around the cluster needs to be out though.

the only annoying part is dropping the steering rack.

chasekeaton · 02-22-2007, 03:07 PM

dam you have to drop the rack to get that thing out... ghey

hahahahaha · 02-22-2007, 03:10 PM

no dash does not have to come off maybe at the most drop the steering colum that would be the easyest way .. so u dont brake the thing around the cluster
but all it is, Is screws thats about it then just unplug the cluster shouldnt take u more than 30min

hahahahaha · 02-22-2007, 03:11 PM

yes what downshift said ^ ^ ^ ^ ^

s13gold · 02-22-2007, 03:17 PM

how is your winshield?

projectRDM · 02-22-2007, 03:21 PM

The JDM cluster will still need to use the SOHC tach, so it's a complete waste of money. Fix the problems you have before trying to cover it up with more shit.

Taniguchi_Is_#1 · 02-22-2007, 04:13 PM

if you get an SR, you'll need a US DOHC or JDM cluster. SOHC tach doesn't work for SRs.

chasekeaton · 02-22-2007, 04:24 PM

JDM cluster? as of any JDM cluster? i.e. password jdm cluster? (do i need the harness that comes with or doesnt come with) the cluster?

UPDATE: all the fuses in the kick panel fuse box are operational!

mRclARK1 · 02-22-2007, 05:40 PM

I have an analog DOHC JDM cluster that I don't need lying around. It should work for what you need. PM me if you're interested.

02-22-2007, 11:27 AM	#2
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	A JDM cluster is not what you need. Check fuses. If those are good source out a used HUD cluster from eGay... welcome. __________________ Don't mess with my monkey...he's loaded.

02-22-2007, 11:54 AM	#5
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	HUD is bleh....most times it's just distracting. Just get a replacement analog if it is in fact your guages. Also after you check the fuses (driver side kick panel) I would pull the guages out and just check to see if they're plugged in! Could be that the previous owner was trying to keep the mileage down and unplugged them...... __________________ Don't mess with my monkey...he's loaded.

02-22-2007, 05:40 PM	#17
mRclARK1 Post Whore! Join Date: Sep 2005 Location: Location? Posts: 4,205 Trader Rating: (0) Feedback Score: 0 reviews	I have an analog DOHC JDM cluster that I don't need lying around. It should work for what you need. PM me if you're interested. __________________

02-22-2007, 11:24 AM	#1
chasekeaton Join Date: Feb 2007 Location: NC Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	New 240 car.. Cluster Problems!?! Hey guys, im new, i have had 20 drag hondas, and i am finally switching to nissan. so hello all! I bought a 90 SE last night, pretty much for the good body. The cluster's HUD doesnt work, Gas Gage doesnt work, and the trip and odo (so who really know what the miles are, kinda sucks) doesnt work. What should i do? go ahead and get the jdm cluster? or do you think they are other issues in the car that need to be fixed, or is the cluster just shot? Thanks Chase!!

02-22-2007, 11:30 AM	#3
chasekeaton Join Date: Feb 2007 Location: NC Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	Why not the jdm cluster to just by pass the little HUD thing? or is the HUD thing preatty cool? i wouldnt know i have never been in on, until mine last night and it doesnt work. I will jump on those fuses right now! Thanks for the info

02-22-2007, 11:36 AM	#4
Taniguchi_Is_#1 Post Whore! Join Date: Jun 2004 Location: West Arkansas Prefecture Posts: 3,141 Trader Rating: (3) Feedback Score: 3 reviews	HUD is cool. i miss mine. but yeah, if you don't care, just get an analog cluster. you'll have to get the analog sub-harness also, though, because the HUD sub-harness is different.

02-22-2007, 12:06 PM	#6
CA18_S13 Zilvia Member Join Date: Sep 2006 Location: Virginia Beach Age: 40 Posts: 180 Trader Rating: (0) Feedback Score: 0 reviews	Hud is good if you don't like looking down at the needle and its just digital display of mph you run. But you can switch to km/h if you want. I love my hud when i go drifting especially with my helmet on.

02-22-2007, 03:02 PM	#7
chasekeaton Join Date: Feb 2007 Location: NC Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	i am in class right now, and i have not really gotten the chance to glance at the cluster and see how hard it is to remove. so how hard is it to remove? does the dash have to come out?

02-22-2007, 03:05 PM	#9
SimpleSexy180 Post Whore! Join Date: Aug 2004 Location: Cal Posts: 4,750 Trader Rating: (8) Rides Gallery: SimpleSexy180 Feedback Score: 8 reviews	its just a bunch of small screws and a few bolts. dash doesnt have to come out to get the cluster. the plastic trim around the cluster needs to be out though. the only annoying part is dropping the steering rack.

02-22-2007, 03:07 PM	#10
chasekeaton Join Date: Feb 2007 Location: NC Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	dam you have to drop the rack to get that thing out... ghey

02-22-2007, 03:10 PM	#11
hahahahaha Zilvia Junkie Join Date: Jun 2006 Location: Califonia Posts: 448 Trader Rating: (0) Feedback Score: 0 reviews	no dash does not have to come off maybe at the most drop the steering colum that would be the easyest way .. so u dont brake the thing around the cluster but all it is, Is screws thats about it then just unplug the cluster shouldnt take u more than 30min

02-22-2007, 03:11 PM	#12
hahahahaha Zilvia Junkie Join Date: Jun 2006 Location: Califonia Posts: 448 Trader Rating: (0) Feedback Score: 0 reviews	yes what downshift said ^ ^ ^ ^ ^

02-22-2007, 03:17 PM	#13
s13gold Post Whore! Join Date: Jan 2007 Location: CARSON Posts: 4,240 Trader Rating: (79) Feedback Score: 79 reviews	how is your winshield?

02-22-2007, 03:21 PM	#14
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	The JDM cluster will still need to use the SOHC tach, so it's a complete waste of money. Fix the problems you have before trying to cover it up with more shit.

02-22-2007, 04:13 PM	#15
Taniguchi_Is_#1 Post Whore! Join Date: Jun 2004 Location: West Arkansas Prefecture Posts: 3,141 Trader Rating: (3) Feedback Score: 3 reviews	if you get an SR, you'll need a US DOHC or JDM cluster. SOHC tach doesn't work for SRs.

02-22-2007, 04:24 PM	#16
chasekeaton Join Date: Feb 2007 Location: NC Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	JDM cluster? as of any JDM cluster? i.e. password jdm cluster? (do i need the harness that comes with or doesnt come with) the cluster? UPDATE: all the fuses in the kick panel fuse box are operational!