![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#2 |
WOW addicted
![]() Join Date: Dec 2001
Location: the moon
Age: 44
Posts: 6,525
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
I know how to on the S13, but no s14
On the S13 you stick a flat head screw driver under the plastic peice that goes around the stereo. Say b/w the part where the dash meets the plastic (the best place I've found is at the bottom of that peice behind the shifter. B/w the plastic peice, and the center console.), and pry up. The plastic peice is help on by some little metal snaps (6). It will pop loose. Once you get that off, there are four screws you have to take out. One on either side of the radio, and two below the Tray under the radio. Remove those and the radio and tray come out together. Once you have it out, unplug the harness, and antena, and Tada. Radio out. (Edited by sykikchimp at 2<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>2 pm on Mar. 1, 2002) |
![]() |
![]() |
![]() |
#3 |
Zilvia Addict
![]() Join Date: Sep 2001
Location: Holland Michigan
Posts: 798
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
top half of surround (with the vents) is snapped in place. IIRC 2 clips on top and 2 clips on bottom. all you can do is carefully pull the panel straight out from dash.
next, remove shifter surround (with boot). it is also snapped in place. 2 clips each side, 2 clips up front. again, all you can do is carefully pry it up. the radio panel is held in by 4 screws IIRC, 2 top, 2 bottom. should be straight forward from there! |
![]() |
![]() |
![]() |
Bookmarks |
|
|