safc-2 after enthalpy tune - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Goinsleeper · 07-02-2007, 03:07 PM

Alright so i got my ecu tuned for the z32 maf and when i plugged it back up i was really rich. i realized i hadnt changed ne thing in my safc-2. i left my manual back at my apartment which is roughly 5 hours away. all i need to do is keep it on hot-wire and run the in and out as the same number right?

drift_ricer · 07-02-2007, 04:36 PM

I think 2in 6out

Goinsleeper · 07-02-2007, 04:39 PM

the ecu is programmed for 300z maf now so no it no longer needs to be 2 in 6 out. just spoke to scott and it needs to be 2 in 2 out or whatever as long as they are the same.
turns out i have a bad tune or bad chip but everything is getting taken care of.

kuramaya · 07-02-2007, 04:51 PM

Yeah if the Computer is tuned for the Z32, then you need not adjust the In/Out. However, I would zero out your Previous settings and start over.

edit - You have (2) setting patterns you can use with the SAFC. Save your old one, then use the second one and retune.
Late
Daryl

07-02-2007, 03:07 PM	#1
Goinsleeper Leaky Injector Join Date: May 2005 Location: Huntsville, AL Age: 39 Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	safc-2 after enthalpy tune Alright so i got my ecu tuned for the z32 maf and when i plugged it back up i was really rich. i realized i hadnt changed ne thing in my safc-2. i left my manual back at my apartment which is roughly 5 hours away. all i need to do is keep it on hot-wire and run the in and out as the same number right? __________________ 96' 200sx stock GA ownage(chirpin 3rd) 92' 240sx SR'ed ~motor's back in!

07-02-2007, 04:39 PM	#3
Goinsleeper Leaky Injector Join Date: May 2005 Location: Huntsville, AL Age: 39 Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	the ecu is programmed for 300z maf now so no it no longer needs to be 2 in 6 out. just spoke to scott and it needs to be 2 in 2 out or whatever as long as they are the same. turns out i have a bad tune or bad chip but everything is getting taken care of. __________________ 96' 200sx stock GA ownage(chirpin 3rd) 92' 240sx SR'ed ~motor's back in!

07-02-2007, 04:51 PM	#4
kuramaya Nissanaholic! Join Date: Dec 2004 Location: 沖縄 , Japan Age: 52 Posts: 1,677 Trader Rating: (1) Rides Gallery: kuramaya Feedback Score: 1 reviews	Yeah if the Computer is tuned for the Z32, then you need not adjust the In/Out. However, I would zero out your Previous settings and start over. edit - You have (2) setting patterns you can use with the SAFC. Save your old one, then use the second one and retune. Late Daryl __________________ ZEROYON WEBSITE IS HOMO NEW SITE: blacklinux.com/innersanctum/index.php

07-02-2007, 04:36 PM	#2
drift_ricer Banned from the Marketplace Join Date: Jul 2006 Location: New Brighton Posts: 114 Trader Rating: (0) Feedback Score: 0 reviews	I think 2in 6out