s14 window. DOOOWWWNN. UP, stop. UP, stop. UP, stop. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gotta240 · 11-02-2007, 09:52 PM

My driver's side window on my s14 goes down just fine. However, when going up it stops off and on.

It has progressively worsened. Now the window rolls up 4 inches and stops for 4 or 5 seconds. Rolls up another 4 inches and stops for 4 or 5 seconds. Does this untill finally reaching the top(like 10 stops in all).

Is this being caused by a bad motor or a relay?

thanks in advance.

*brndck* · 11-02-2007, 09:56 PM

my bet is motor. wanna check? get a new relay. its cheaper and easier than trying a new motor. but my moneys on motor.

projectRDM · 11-03-2007, 12:01 AM

Motor, but it could be from kinked linkage too. Has any of the window adjustments come loose?

Z U L8R · 11-03-2007, 05:34 PM

power window regulator ftw

cloudstrife930 · 11-03-2007, 06:04 PM

I would check the motor and regulator, but it could very possibly be a switch as well. As long as you have no binding noises or grinding its probably not the regulator. motor switch or relays..swap relays, swap switches and even swap motor to isolate issue

gotta240 · 11-03-2007, 06:43 PM

Quote:

Originally Posted by cloudstrife930

I would check the motor and regulator, but it could very possibly be a switch as well. As long as you have no binding noises or grinding its probably not the regulator. motor switch or relays..swap relays, swap switches and even swap motor to isolate issue

Lol. If i wanted to do all that i wouldn't have posted the question! Thanks for the reply though.

R240na- thanks for the reply. No binding/anything lose. Will try motor first. thanks

11-02-2007, 09:52 PM	#1
gotta240 Post Whore! Join Date: Dec 2005 Location: so cal Posts: 3,496 Trader Rating: (21) Feedback Score: 21 reviews	s14 window. DOOOWWWNN. UP, stop. UP, stop. UP, stop. My driver's side window on my s14 goes down just fine. However, when going up it stops off and on. It has progressively worsened. Now the window rolls up 4 inches and stops for 4 or 5 seconds. Rolls up another 4 inches and stops for 4 or 5 seconds. Does this untill finally reaching the top(like 10 stops in all). Is this being caused by a bad motor or a relay? thanks in advance.

11-03-2007, 12:01 AM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Motor, but it could be from kinked linkage too. Has any of the window adjustments come loose? __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

11-03-2007, 05:34 PM	#4
Z U L8R Zilvia FREAK! Join Date: Jan 2007 Location: Georgia Age: 43 Posts: 1,194 Trader Rating: (0) Feedback Score: 0 reviews	power window regulator ftw __________________ RB25 280z GT30/76R 441hp/381tq 11.9@125

11-02-2007, 09:56 PM	#2
brndck Premium Member Join Date: Jun 2003 Location: torrance, ca Age: 43 Posts: 12,686 Trader Rating: (130) Rides Gallery: brndck Feedback Score: 130 reviews	my bet is motor. wanna check? get a new relay. its cheaper and easier than trying a new motor. but my moneys on motor.

11-03-2007, 06:04 PM	#5
cloudstrife930 Leaky Injector Join Date: Jul 2007 Location: long island NY Age: 44 Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	I would check the motor and regulator, but it could very possibly be a switch as well. As long as you have no binding noises or grinding its probably not the regulator. motor switch or relays..swap relays, swap switches and even swap motor to isolate issue