clear bumper lights for 91 240sx - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nissan4lyph · 12-24-2001, 10:44 PM

can anyone help me find these i really need this..jspec.com had it but they ran out
thanks

Kid Zelda · 12-24-2001, 10:56 PM

http://search.ebay.com/search....p>enjoy

nissan4lyph · 12-24-2001, 10:59 PM

whoops sorry i mean the fender lights

Kid Zelda · 12-24-2001, 11:06 PM

You can contact this white streak, freak

www.clearcorners.com

nissan4lyph · 12-25-2001, 10:26 AM

thx but dam thats expensive!

hookedup240 · 12-25-2001, 10:30 AM

you can do what i did i got the ml 320 side markers and they work but you have to shave them down a little with a file to make them fit, they look alot better than stock, but they are yellow when they are lit but still alot nicer

Impact · 12-25-2001, 12:22 PM

n e problems with rusting by doing that??

MorganS13 · 12-25-2001, 01:46 PM

i bought some of those ML320 lights about 2 or 3 months ago and its been a pain in the a** tryin to shave them down to fit. What did u use to do that? I've been using a wood chisel and its sharp but its not very effective. Also, u can get the orange out of the lights by breaking the orange plastic out of them. Thats as far as i have gotten so far... And if anyone wants to know how much they are they are really cheap, mine were i think $4 each.

hookedup240 · 12-25-2001, 01:58 PM

I haven't had any problems with mine i used a file to file down the plastic part of the lights it took a while but it was ok, I still have the orange in mine is it easy to break it out??

MorganS13 · 12-25-2001, 02:50 PM

it was pretty tough to get the orange out. Mostly just time consuming though. and u gotta be careful not to crack the outside lenses in the process. I took a pocket knife and some needle nose pliers and just kept breakin pieces of the orange plastic "dome" till it was small enough to pull out through the hole. Its a good way to kill 2 hours....Guess i'm gonna go get the file out and work on gettin them to fit into my fender again.

*LanceS13* · 12-30-2001, 11:22 PM

I have the ML320 sidemarkers, too and I just filed the hole in the fender to match the lights...figured the metal fender would take the abuse better than a brittle plastic housing.  It's not hard.  Just do it a bit at a time with an electric grinder like a dremel.  Be careful...you don't want the hole too big.  Once they fit, put some paint on the grinded area to prevent rust (I sprayed black spraypaint in a cup and applied it with a small brush...doesn't have to be perfect b/c nobody's gonna see behind your sidemarkers) and smear some silicon sealant or similar adhesive to the backside of the light to make sure it stays put.

12-24-2001, 10:44 PM	#1
nissan4lyph Join Date: Jul 2001 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	can anyone help me find these i really need this..jspec.com had it but they ran out thanks

12-24-2001, 10:56 PM	#2
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0) Feedback Score: 0 reviews	http://search.ebay.com/search....p>enjoy

12-24-2001, 10:59 PM	#3
nissan4lyph Join Date: Jul 2001 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	whoops sorry i mean the fender lights

12-24-2001, 11:06 PM	#4
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0) Feedback Score: 0 reviews	You can contact this white streak, freak www.clearcorners.com

12-25-2001, 10:26 AM	#5
nissan4lyph Join Date: Jul 2001 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	thx but dam thats expensive!

12-25-2001, 10:30 AM	#6
hookedup240 Zilvia FREAK! Join Date: Dec 2001 Location: NJ Age: 41 Posts: 1,149 Trader Rating: (0) Feedback Score: 0 reviews	you can do what i did i got the ml 320 side markers and they work but you have to shave them down a little with a file to make them fit, they look alot better than stock, but they are yellow when they are lit but still alot nicer

12-25-2001, 12:22 PM	#7
Impact Leaky Injector Join Date: Oct 2001 Posts: 125 Trader Rating: (0) Feedback Score: 0 reviews	n e problems with rusting by doing that??

12-25-2001, 01:46 PM	#8
MorganS13 Zilvia Addict Join Date: Dec 2001 Location: Midwest Posts: 707 Trader Rating: (1) Feedback Score: 1 reviews	i bought some of those ML320 lights about 2 or 3 months ago and its been a pain in the a** tryin to shave them down to fit. What did u use to do that? I've been using a wood chisel and its sharp but its not very effective. Also, u can get the orange out of the lights by breaking the orange plastic out of them. Thats as far as i have gotten so far... And if anyone wants to know how much they are they are really cheap, mine were i think $4 each.

12-25-2001, 01:58 PM	#9
hookedup240 Zilvia FREAK! Join Date: Dec 2001 Location: NJ Age: 41 Posts: 1,149 Trader Rating: (0) Feedback Score: 0 reviews	I haven't had any problems with mine i used a file to file down the plastic part of the lights it took a while but it was ok, I still have the orange in mine is it easy to break it out??

12-25-2001, 02:50 PM	#10
MorganS13 Zilvia Addict Join Date: Dec 2001 Location: Midwest Posts: 707 Trader Rating: (1) Feedback Score: 1 reviews	it was pretty tough to get the orange out. Mostly just time consuming though. and u gotta be careful not to crack the outside lenses in the process. I took a pocket knife and some needle nose pliers and just kept breakin pieces of the orange plastic "dome" till it was small enough to pull out through the hole. Its a good way to kill 2 hours....Guess i'm gonna go get the file out and work on gettin them to fit into my fender again.

12-30-2001, 11:22 PM	#11
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 43 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	I have the ML320 sidemarkers, too and I just filed the hole in the fender to match the lights...figured the metal fender would take the abuse better than a brittle plastic housing.  It's not hard.  Just do it a bit at a time with an electric grinder like a dremel.  Be careful...you don't want the hole too big.  Once they fit, put some paint on the grinded area to prevent rust (I sprayed black spraypaint in a cup and applied it with a small brush...doesn't have to be perfect b/c nobody's gonna see behind your sidemarkers) and smear some silicon sealant or similar adhesive to the backside of the light to make sure it stays put.