600hp turbo s2k fully built gt35r erl in kentucky - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

h22acivicjdm · 10-08-2008, 09:18 PM

Im selling this car because i have a baby on the way. It has been tuned on a mustang dyno at 30psi and made 601hp, and ran a 7.0@102 in the 8th mile( ohio valley).
It runs great. I'm looking to get $22,000 OBO for this car. car is sold as is because so many mods

Make: Honda
Model : S2000
Year : 2000
Color : Silverstone
Body Mileage : 89,000
Engine Mileage :100 just had full rebuild from erl ring, bearing, oil pump etc

Modifications :
Engine:
stock head
Erl Bottom End with Darton Sleeves stock bore, CP Pistons calico coated top, skirts, CP Rings, and Crower Rods – 9.0:1 Final Compression Ratio
ACL calico coated race bearings
new oem oil pump
Rick's underdrive pulleys
innovativemounts Urethane Stiffness 95A Extreme
CARBONETIC triple disc clutch
AEM EMS with Uego
HKS Twin Power Ignition Amplifier
Lovefab mini-me Manifold
garret gt 35r .82 ex Turbo
Lovefab 3” Downpipe
Inline Pro 3” Exhaust
Tial 44mm Wastegate
hks Blow-Off Valve
rc 1200cc Injectors
AEM egt probe
AEM 5 Bar Map Sensor
AEM Fuel Pressure Regulator
Walboro 255 Fuel Pump
Hondata Intake Manifold Gasket
Koyo Radiator
neukin catch can
Tein hood shocks
Precision 750hp intercooler
odyssey battery PC680MJT put in trunk
Suspension:
Cusco subframe bracing
Megan coilovers
Inline Pro Differential Conversion Kit with Driveshaftshop Custom Driveshaft and Stage5 Axles
Nissan 300ZX Non-Turbo Differential
mickey thompson et street
Exterior:
Oem Front Lip
stock wheels
vis oem cf hood
vis cf trunk
oem black hardtop it has only the hardtop= no soft top at all
Interior:
Cusco 4 Point Roll Cage
Aem oil pressure gauge
Aem true boost Gauge
AEM serial gauge
SOS 52mm dual gauge pod

*racerx2k1* · 10-09-2008, 07:06 PM

Post only if you are interested in buying the car.

h22acivicjdm · 10-10-2008, 06:55 PM

car 371

bj350z · 10-10-2008, 06:57 PM

60ft sucks! but nice s2000 even tho its a honda

h22acivicjdm · 10-11-2008, 07:19 PM

Quote:

Originally Posted by bj350z

60ft sucks! but nice s2000 even tho its a honda

1.7 60ft isnt that bad.

helikz · 10-13-2008, 11:53 AM

have you had any problems with the lovefab manifold? everyone I know that used their s2k manifold has switched to an inline pro log, custom, or full race because of the cracking.

I know they will repair them for free, but still....

h22acivicjdm · 10-14-2008, 06:27 PM

Quote:

Originally Posted by helikz

have you had any problems with the lovefab manifold? everyone I know that used their s2k manifold has switched to an inline pro log, custom, or full race because of the cracking.

I know they will repair them for free, but still....

no problems at all

Sil-Eighty SE-K · 10-14-2008, 06:29 PM

trades???????

h22acivicjdm · 10-14-2008, 08:20 PM

Quote:

Originally Posted by Sil-Eighty SE-K

trades???????

what do you have?

mayco_86 · 10-14-2008, 10:28 PM

Quote:

Originally Posted by h22acivicjdm

what do you have?

He wants to trade for the Skyline that he has on that Picture.

h22acivicjdm · 10-16-2008, 01:44 PM

Quote:

Originally Posted by Sil-Eighty SE-K

trades???????

show me what you have?

10-08-2008, 09:18 PM	#1
h22acivicjdm Join Date: Sep 2006 Location: louisville ky Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	600hp turbo s2k fully built gt35r erl in kentucky Im selling this car because i have a baby on the way. It has been tuned on a mustang dyno at 30psi and made 601hp, and ran a 7.0@102 in the 8th mile( ohio valley). It runs great. I'm looking to get $22,000 OBO for this car. car is sold as is because so many mods Make: Honda Model : S2000 Year : 2000 Color : Silverstone Body Mileage : 89,000 Engine Mileage :100 just had full rebuild from erl ring, bearing, oil pump etc Modifications : Engine: stock head Erl Bottom End with Darton Sleeves stock bore, CP Pistons calico coated top, skirts, CP Rings, and Crower Rods – 9.0:1 Final Compression Ratio ACL calico coated race bearings new oem oil pump Rick's underdrive pulleys innovativemounts Urethane Stiffness 95A Extreme CARBONETIC triple disc clutch AEM EMS with Uego HKS Twin Power Ignition Amplifier Lovefab mini-me Manifold garret gt 35r .82 ex Turbo Lovefab 3” Downpipe Inline Pro 3” Exhaust Tial 44mm Wastegate hks Blow-Off Valve rc 1200cc Injectors AEM egt probe AEM 5 Bar Map Sensor AEM Fuel Pressure Regulator Walboro 255 Fuel Pump Hondata Intake Manifold Gasket Koyo Radiator neukin catch can Tein hood shocks Precision 750hp intercooler odyssey battery PC680MJT put in trunk Suspension: Cusco subframe bracing Megan coilovers Inline Pro Differential Conversion Kit with Driveshaftshop Custom Driveshaft and Stage5 Axles Nissan 300ZX Non-Turbo Differential mickey thompson et street Exterior: Oem Front Lip stock wheels vis oem cf hood vis cf trunk oem black hardtop it has only the hardtop= no soft top at all Interior: Cusco 4 Point Roll Cage Aem oil pressure gauge Aem true boost Gauge AEM serial gauge SOS 52mm dual gauge pod

10-13-2008, 11:53 AM	#6
helikz Leaky Injector Join Date: Nov 2007 Location: VA Age: 46 Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	have you had any problems with the lovefab manifold? everyone I know that used their s2k manifold has switched to an inline pro log, custom, or full race because of the cracking. I know they will repair them for free, but still.... __________________ You should listen to your friend Billy Zane, he's a cool dude....

10-09-2008, 07:06 PM	#2
racerx2k1 460 Join Date: Jan 2004 Location: Nowhere Posts: 17,704 Trader Rating: (0) Feedback Score: 0 reviews	Post only if you are interested in buying the car.

10-10-2008, 06:55 PM	#3
h22acivicjdm Join Date: Sep 2006 Location: louisville ky Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	car 371

10-10-2008, 06:57 PM	#4
bj350z BANNED Join Date: Oct 2008 Location: denver Age: 44 Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	60ft sucks! but nice s2000 even tho its a honda