KA-T Setup Dyno Session - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

redpotatoes · 11-25-2008, 08:19 AM

Went on the dyno to have my car finished. I am happy with the results. AFR was at 11.x~12 and boost was set at 10psi (was running 9.X on the dyno).

My current setup is:

97 Engine with a 95 intake
T28BB Turbo (Rebuilt with a ported wastegate)
370cc injectors (DeatschWerks rebuilt and tested)
N60 Maf
Bottom mount manifold
Turbo elbow
Custom 3" downpipe
3" testpipe
5 zigen fireball cat back ~2.5" (60.5mm)
Custom 2.5" Intercooler piping
FMIC 28x6x2.5
OEM Nissan gaskets
NTK 02 sensor new
BKR6E spark plugs
OEM Fuel filter
Walbro 255 fuel pump
JGS Vacuum block
Greddy BOV type rs
Greddy Profec-b spec II boost controller
S13 ECU (Almasi tuning)
Fidanza flywheel
Bully performance Stage 4 clutch kit
Optima redtop battery relocated in the trunk

Dyno session took place on a dynapack. Here it is !

11-25-2008, 08:19 AM	#1
redpotatoes Zilvia Member Join Date: Apr 2005 Location: Qc Posts: 219 Trader Rating: (2) Feedback Score: 2 reviews	KA-T Setup Dyno Session Went on the dyno to have my car finished. I am happy with the results. AFR was at 11.x~12 and boost was set at 10psi (was running 9.X on the dyno). My current setup is: 97 Engine with a 95 intake T28BB Turbo (Rebuilt with a ported wastegate) 370cc injectors (DeatschWerks rebuilt and tested) N60 Maf Bottom mount manifold Turbo elbow Custom 3" downpipe 3" testpipe 5 zigen fireball cat back ~2.5" (60.5mm) Custom 2.5" Intercooler piping FMIC 28x6x2.5 OEM Nissan gaskets NTK 02 sensor new BKR6E spark plugs OEM Fuel filter Walbro 255 fuel pump JGS Vacuum block Greddy BOV type rs Greddy Profec-b spec II boost controller S13 ECU (Almasi tuning) Fidanza flywheel Bully performance Stage 4 clutch kit Optima redtop battery relocated in the trunk Dyno session took place on a dynapack. Here it is !