![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
![]() |
HELP!! cars running crazy...
got a problem and couldnt find it searching. i retimed my motor because it wouldnt start, and now it starts but idling or anything before 3000rpms the motor seems to want to die out. so wen i drive i just stay on the gas and brake when i slow down or stop. anything past 3000, the car drives fine like normal. any ideas what could be wrong??
|
![]() |
![]() |
Sponsored Links |
![]() |
#3 |
Leaky Injector
![]() |
well what happened was the motor before this motor was a ka-t. so everything is changed over and only thing it has from it being turbo is an afc neo but corrections are set off. its a stock ka24de. just intake and exhaust. when i timed it i placed it at tdc
|
![]() |
![]() |
![]() |
#4 |
Zilvia FREAK!
![]() Join Date: Jan 2007
Location: Georgia
Age: 43
Posts: 1,194
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
the timing is 20 degrees advanced at idle.
your safc should be hotwire 5 in 5 out (if you have the stock maf, and an untuned ecu, if this is not the case, give more info on what maf u have, and if u have a jwt tuned ecu or something like that ) go to sensor check under ETC and check your tps voltage, closed and wide open throttle should be in the ball park of .5 volts closed and 4.0+ wide open under CAR Select you should have it as a 4 cylinder with the arrow pointing North East if you don't find your problem while checking these things, post back with what your results and we'll go from there Dave
__________________
|
![]() |
![]() |
![]() |
Bookmarks |
|
|