RI built sr20 part out - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gippy87 · 02-22-2009, 11:55 AM

Only if i can find a buyer for most of these parts otherwise id like to sell as is.

The motor made 355rwhp at DSG however the cometic gasket wasnt holding up so they could not tune the motor to its full potential. But the motor does come with a new apexi hg.

Most prices are negotiable.

Shell $600

motor (does not include turbo or manifold): $2500
includes wiring harness ready for s13, all accessories (no a/c), new belts
heater hoses to hookup to US s13, transmission
new oil pump/front cover
new waterpump
all new gaskets and seals
Deatschwerks 740cc injectors
Cp pistons
Eagle rods
Greddy oil pan
Arp main/head studs
Currently has cometic head gasket but includes new apexi gasket
Hks step 2 264 cams
Hks adj. Cam gears
Brain crower springs and retainers
Greddy ras
nismo fpr
act 6puck clutch

Parts:
Gt3076r with tial vband housing $1000
Synapse top mount mani with lifetime warranty $600
Custom downpipe test pipe built in $300
44mm tial wastegate $275
greddy rs bov $100
Greddy fmic ls-spec $350
Rsr 3 inch catback $300
Z32 maf w/ new pigtail $100
Apexi power fc with commander $600
Blitz sbc id III boost controller $300
Koyo rad with samco hoses $300
One piece steel driveshaft $225
Nismo mounts $50
innovate lm-1 wideband $250
Car was only driven home from tuning at dent sport garage to ri and then parked for the winter. all parts were brand new so its got less then ~100 miles on everything.

i think everyone will agree that the prices are pretty good. everything here totals about $7800
id be willing to sell the whole car as is for $6000obo has few other things not listed welded diff, aftermarket wheels, autometer elec. oil pressure gauge

s15specR · 02-22-2009, 02:18 PM

interested in the manifold, wastegate and downpipe

is the mani ac and ps compatible ?

gippy87 · 02-22-2009, 02:42 PM

I had no issues with power steering but my car does not have ac so I'm not sure on that. It required some modification to the oil dipstick tube I just had to bend it straight

JDMtyteYO! · 02-22-2009, 02:43 PM

defently interested in the motor. did you do a compression test? how many pounds were you running on the dyno? any knocks or the infamous sr ticking at idle? have receipts? who did all the internal work/maching/boring?

forum04pl · 02-22-2009, 03:01 PM

Are you selling that CS coolant reservoir?

gippy87 · 02-22-2009, 08:31 PM

i didnt post the coolant overflow tank cause it sucks and i wouldnt want anyone else to own it lol. None of the bolt holes lined up and the placement on the outlet was terrible it hits the wheel well also the CS badge fell off and coolant leaks out of the level indicator. Maybe i just got a bad one but either way its not worth anything to me so if i part the car out ill just give it to you for the price of shipping.

traxx07 · 02-22-2009, 09:01 PM

willing to ship the nismo mounts?

JDMtyteYO! · 02-22-2009, 09:09 PM

welll i might as well....i got first dibs on the motor, possibly the power fc and possibly the mounts. got money ready. waiting for you to message back...

forum04pl · 02-22-2009, 09:32 PM

Quote:

Originally Posted by gippy87

i didnt post the coolant overflow tank cause it sucks and i wouldnt want anyone else to own it lol. None of the bolt holes lined up and the placement on the outlet was terrible it hits the wheel well also the CS badge fell off and coolant leaks out of the level indicator. Maybe i just got a bad one but either way its not worth anything to me so if i part the car out ill just give it to you for the price of shipping.

Haha well thanks for the honesty. Let me know if you part it. Ill just come pick it up maybe, I have some friends down there. I also might pick some other stuff up from you. Ill keep in touch.

ross.cottrill · 02-23-2009, 04:58 PM

how much fro just the short block?

sicksx · 02-23-2009, 05:56 PM

how much for all the turbo lines?

karforty5 · 02-23-2009, 06:29 PM

Can I get a pick of the downpipe sent to [email protected]? Injectors for sale, if so how much?

gippy87 · 02-23-2009, 07:28 PM

Quote:

Originally Posted by ross.cottrill

how much fro just the short block?

Right now id prefer to sell it all together but pm me an offer on just the short block and ill get back to you asap.

Quote:

Originally Posted by sicksx

how much for all the turbo lines?

i guess $80 would be good

Quote:

Originally Posted by karforty5

Can I get a pick of the downpipe sent to [email protected]? Injectors for sale, if so how much?

Looking to see if i have any pics of it if not ill get them tommorrow morning. Injectors wil go with the motor unless ross has a good offer on the short block in which case ill part the head out.

jr_ss · 02-23-2009, 07:31 PM

If S15specR backs out on the wastegate, I'll snatch it up...

gippy87 · 02-23-2009, 08:02 PM

someone else just pm'd me on the wastegate accidently deleted it when cleaning out the folder so please resend the pm also someone sent me a pm about the driveshaft which got deleted . I should have someone coming to check out the engine and a few other parts tommorrow if that goes well then ill probably start selling and shipping parts.

ByeByeSti · 02-23-2009, 08:18 PM

i vouch for this man, his car is legit. so is his build ive met him and also sold him my injectors etc! dont think twice to deal with him, good kid keep it up. glws sad to see it go...

sideways asian · 02-23-2009, 09:41 PM

pmd abou rs bov

gippy87 · 02-24-2009, 04:18 PM

i never got the pm about the bov idk who ya sent it to

jr_ss · 02-24-2009, 05:45 PM

Did you get my pm about the gate?

KenSR20 · 02-24-2009, 06:33 PM

That coolant tank sucks? I see one on ebay for like 100 bucks lol Just cant spend that one a coolant tank =( Nice setup man sucks you are selling it before enjoying it. Wish I saw this last year while i was doing my build could have used almost all of it..

V8slayr · 02-24-2009, 09:59 PM

I sent you a PM about the cams, then realize that it wouldn't make a lot of sense to part out head if someone wants the motor, BUT, if you do end up parting out I'd like the cams

gippy87 · 02-24-2009, 11:36 PM

well i got a bunch of different offers for engine parts right now. seems no one has the money for the full swap but people could use the nismo fpr, cams, injectors clutch things like that so i may part the motor also. Im waiting on 2 people to get back to me about the whole car i dont want to tear it down ye with people still intrested in buying it as is. im going to give it one more day i think. I dont really wanna keep waiting on this i got to many offers on parts

ka24det92 · 02-25-2009, 06:32 AM

price on power fc drive shaft and mounts shipped to 77545 please

Snail Power · 02-25-2009, 06:42 AM

Just Selling For CASH? or will you consider trades?

Dcboyz4eva · 02-25-2009, 07:47 AM

Hey man very interested in a bunchhh of the stuff u have. Email me at [email protected] and we can work something out

sicksx · 02-25-2009, 01:47 PM

waitin on the word to send payment for hoses

gippy87 · 02-25-2009, 09:13 PM

Pending sale on turbo, mani, wastegate, turbo lines.

ross.cottrill · 02-25-2009, 11:08 PM

let me know bout the longblock..

02-22-2009, 11:55 AM	#1
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	built sr20 part out Only if i can find a buyer for most of these parts otherwise id like to sell as is. The motor made 355rwhp at DSG however the cometic gasket wasnt holding up so they could not tune the motor to its full potential. But the motor does come with a new apexi hg. Most prices are negotiable. Shell $600 motor (does not include turbo or manifold): $2500 includes wiring harness ready for s13, all accessories (no a/c), new belts heater hoses to hookup to US s13, transmission new oil pump/front cover new waterpump all new gaskets and seals Deatschwerks 740cc injectors Cp pistons Eagle rods Greddy oil pan Arp main/head studs Currently has cometic head gasket but includes new apexi gasket Hks step 2 264 cams Hks adj. Cam gears Brain crower springs and retainers Greddy ras nismo fpr act 6puck clutch Parts: Gt3076r with tial vband housing $1000 Synapse top mount mani with lifetime warranty $600 Custom downpipe test pipe built in $300 44mm tial wastegate $275 greddy rs bov $100 Greddy fmic ls-spec $350 Rsr 3 inch catback $300 Z32 maf w/ new pigtail $100 Apexi power fc with commander $600 Blitz sbc id III boost controller $300 Koyo rad with samco hoses $300 One piece steel driveshaft $225 Nismo mounts $50 innovate lm-1 wideband $250 Car was only driven home from tuning at dent sport garage to ri and then parked for the winter. all parts were brand new so its got less then ~100 miles on everything. i think everyone will agree that the prices are pretty good. everything here totals about $7800 id be willing to sell the whole car as is for $6000obo has few other things not listed welded diff, aftermarket wheels, autometer elec. oil pressure gauge Last edited by gippy87; 02-24-2009 at 04:32 PM..

02-23-2009, 04:58 PM	#10
ross.cottrill Zilvia FREAK! Join Date: Sep 2005 Location: orlando,fl Posts: 1,185 Trader Rating: (12) Feedback Score: 12 reviews	how much fro just the short block? __________________ " NEO VVL BABY FTMFW!" Originally Posted by shagspeed Dude if I made 500WHP on a 54C SR20DET back in 1999-2000 with old school technology .. This VET will T-BAG your RB engines

02-23-2009, 06:29 PM	#12
karforty5 Leaky Injector Join Date: Aug 2008 Location: Fort Lauderdale Age: 41 Posts: 136 Trader Rating: (4) Feedback Score: 4 reviews	Can I get a pick of the downpipe sent to [email protected]? Injectors for sale, if so how much? __________________ 6 Million ways to die, Choose 1

02-23-2009, 07:31 PM	#14
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	If S15specR backs out on the wastegate, I'll snatch it up... __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

02-24-2009, 05:45 PM	#19
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	Did you get my pm about the gate? __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

02-22-2009, 02:18 PM	#2
s15specR Zilvia FREAK! Join Date: Oct 2007 Location: USA Posts: 1,023 Trader Rating: (18) Feedback Score: 18 reviews	interested in the manifold, wastegate and downpipe is the mani ac and ps compatible ?

02-22-2009, 02:42 PM	#3
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	I had no issues with power steering but my car does not have ac so I'm not sure on that. It required some modification to the oil dipstick tube I just had to bend it straight

02-22-2009, 02:43 PM	#4
JDMtyteYO! Zilvia Addict Join Date: Feb 2009 Location: SFL Age: 34 Posts: 906 Trader Rating: (20) Feedback Score: 20 reviews	defently interested in the motor. did you do a compression test? how many pounds were you running on the dyno? any knocks or the infamous sr ticking at idle? have receipts? who did all the internal work/maching/boring?

02-22-2009, 03:01 PM	#5
forum04pl Zilvia Junkie Join Date: Aug 2006 Location: boston Posts: 573 Trader Rating: (10) Feedback Score: 10 reviews	Are you selling that CS coolant reservoir?

02-22-2009, 08:31 PM	#6
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	i didnt post the coolant overflow tank cause it sucks and i wouldnt want anyone else to own it lol. None of the bolt holes lined up and the placement on the outlet was terrible it hits the wheel well also the CS badge fell off and coolant leaks out of the level indicator. Maybe i just got a bad one but either way its not worth anything to me so if i part the car out ill just give it to you for the price of shipping.

02-22-2009, 09:01 PM	#7
traxx07 Nissanaholic! Join Date: Dec 2008 Location: San Antonio, TX Age: 36 Posts: 1,988 Trader Rating: (63) Feedback Score: 63 reviews	willing to ship the nismo mounts?

02-22-2009, 09:09 PM	#8
JDMtyteYO! Zilvia Addict Join Date: Feb 2009 Location: SFL Age: 34 Posts: 906 Trader Rating: (20) Feedback Score: 20 reviews	welll i might as well....i got first dibs on the motor, possibly the power fc and possibly the mounts. got money ready. waiting for you to message back...

02-23-2009, 05:56 PM	#11
sicksx Zilvia Member Join Date: Nov 2007 Location: windsor locks ct Age: 38 Posts: 203 Trader Rating: (0) Feedback Score: 0 reviews	how much for all the turbo lines?

02-23-2009, 08:02 PM	#15
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	someone else just pm'd me on the wastegate accidently deleted it when cleaning out the folder so please resend the pm also someone sent me a pm about the driveshaft which got deleted . I should have someone coming to check out the engine and a few other parts tommorrow if that goes well then ill probably start selling and shipping parts.

02-23-2009, 08:18 PM	#16
ByeByeSti Banned from the Marketplace Join Date: Jan 2008 Location: New Hampshire Age: 35 Posts: 803 Trader Rating: (0) Feedback Score: 0 reviews	i vouch for this man, his car is legit. so is his build ive met him and also sold him my injectors etc! dont think twice to deal with him, good kid keep it up. glws sad to see it go...

02-23-2009, 09:41 PM	#17
sideways asian Zilvia Member Join Date: Jan 2009 Location: seattle washington Posts: 238 Trader Rating: (10) Feedback Score: 10 reviews	pmd abou rs bov

02-24-2009, 04:18 PM	#18
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	i never got the pm about the bov idk who ya sent it to

02-24-2009, 06:33 PM	#20
KenSR20 Leaky Injector Join Date: Sep 2005 Location: NC Age: 41 Posts: 104 Trader Rating: (3) Feedback Score: 3 reviews	That coolant tank sucks? I see one on ebay for like 100 bucks lol Just cant spend that one a coolant tank =( Nice setup man sucks you are selling it before enjoying it. Wish I saw this last year while i was doing my build could have used almost all of it..

02-24-2009, 09:59 PM	#21
V8slayr Leaky Injector Join Date: Dec 2007 Location: Huntsville, AL Age: 39 Posts: 124 Trader Rating: (3) Feedback Score: 3 reviews	I sent you a PM about the cams, then realize that it wouldn't make a lot of sense to part out head if someone wants the motor, BUT, if you do end up parting out I'd like the cams

02-24-2009, 11:36 PM	#22
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	well i got a bunch of different offers for engine parts right now. seems no one has the money for the full swap but people could use the nismo fpr, cams, injectors clutch things like that so i may part the motor also. Im waiting on 2 people to get back to me about the whole car i dont want to tear it down ye with people still intrested in buying it as is. im going to give it one more day i think. I dont really wanna keep waiting on this i got to many offers on parts

02-25-2009, 06:32 AM	#23
ka24det92 Zilvia Junkie Join Date: Feb 2009 Location: houston Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	price on power fc drive shaft and mounts shipped to 77545 please

02-25-2009, 06:42 AM	#24
Snail Power BANNED Join Date: Feb 2009 Location: Central Va Posts: 183 Trader Rating: (1) Feedback Score: 1 reviews	Just Selling For CASH? or will you consider trades?

02-25-2009, 07:47 AM	#25
Dcboyz4eva Join Date: Feb 2009 Location: Reading pa Age: 36 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Hey man very interested in a bunchhh of the stuff u have. Email me at [email protected] and we can work something out

02-25-2009, 01:47 PM	#26
sicksx Zilvia Member Join Date: Nov 2007 Location: windsor locks ct Age: 38 Posts: 203 Trader Rating: (0) Feedback Score: 0 reviews	waitin on the word to send payment for hoses

02-25-2009, 09:13 PM	#27
gippy87 Zilvia Junkie Join Date: Dec 2007 Location: ri Age: 37 Posts: 314 Trader Rating: (10) Feedback Score: 10 reviews	Pending sale on turbo, mani, wastegate, turbo lines.

02-25-2009, 11:08 PM	#28
ross.cottrill Zilvia FREAK! Join Date: Sep 2005 Location: orlando,fl Posts: 1,185 Trader Rating: (12) Feedback Score: 12 reviews	let me know bout the longblock.. __________________ " NEO VVL BABY FTMFW!" Originally Posted by shagspeed Dude if I made 500WHP on a 54C SR20DET back in 1999-2000 with old school technology .. This VET will T-BAG your RB engines