Wiring harness replacement connectors - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bb4_96 · 07-29-2010, 06:29 AM

My weeks of being a persistent pita for several companies around the world have brought me to a point now where I can start offering some of my findings. If you've read any of my posts I've been hunting for factory nissan connectors for a while. I've made a couple good strides into the market now and am poised to start making purchases.

So my question is this. Until I ramp up my efforts into full on made to order/custom tailored harnesses, is there a market for BNIB factory replacement connectors? No more busted tabs, mangled/melted housings, loose contacts. An opportunity to repin and relengthen your harness without soldering.

If theres enough interest I'll start stocking to sell soon. If not I can hold off till I find sources for the rest of my operation.

Also I can provide a used version of just about any connector on most cars, don't know if that's useful either. I'm hoping i can provide full range of components from used to new and new/used eg used good housing with some new terminals.

Let me know what is the consensus.

Homer_Simpson · 07-29-2010, 12:03 PM

Could you give like a ballpark figure for how much a complete set of connectors would cost?

I'm assuming that these connectors includes brand new pins?

Also, will you be selling the appropriate crimping tools for said connectors?

onlydrinkkoolaid · 07-29-2010, 12:23 PM

it would trully depend on the pricing and options for conversion harnesses that would get you so business as well

bb4_96 · 07-30-2010, 04:06 AM

I think the average connectoprice could be affordable. You could probably replace all the underhood engine harness plugs for $100 or less. I haven't hatched out pricing yet as it's going to depend on how much I purchase.

raiser · 09-06-2011, 12:16 AM

I know this post is over a year old..... but would really like some of these.

Have problems with brittle tabs on my Skyline harness connectors - so would be interested in connectors too - if the price was right.

..... or if you have decided not to sell these details of suppliers would be useful.

bb4_96 · 10-18-2011, 09:21 PM

still in talks with a guy who is in a better position than I to acquire these in terms of moqs. Any connectors in particular?

nytro2413 · 11-02-2011, 08:18 PM

im interested in replacing a bunch of broken connectors on my ka any more info on them?

badboy6686 · 11-02-2011, 08:45 PM

I'm very interested in this, but for VH45DE connectors.

07-29-2010, 06:29 AM	#1
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	Wiring harness replacement connectors My weeks of being a persistent pita for several companies around the world have brought me to a point now where I can start offering some of my findings. If you've read any of my posts I've been hunting for factory nissan connectors for a while. I've made a couple good strides into the market now and am poised to start making purchases. So my question is this. Until I ramp up my efforts into full on made to order/custom tailored harnesses, is there a market for BNIB factory replacement connectors? No more busted tabs, mangled/melted housings, loose contacts. An opportunity to repin and relengthen your harness without soldering. If theres enough interest I'll start stocking to sell soon. If not I can hold off till I find sources for the rest of my operation. Also I can provide a used version of just about any connector on most cars, don't know if that's useful either. I'm hoping i can provide full range of components from used to new and new/used eg used good housing with some new terminals. Let me know what is the consensus.

07-29-2010, 12:03 PM	#2
Homer_Simpson Zilvia Addict Join Date: Jun 2008 Location: Back in the Bay! Posts: 619 Trader Rating: (11) Feedback Score: 11 reviews	Could you give like a ballpark figure for how much a complete set of connectors would cost? I'm assuming that these connectors includes brand new pins? Also, will you be selling the appropriate crimping tools for said connectors?

07-29-2010, 12:23 PM	#3
onlydrinkkoolaid Zilvia Member Join Date: Dec 2009 Location: Gainesville,FL Age: 36 Posts: 204 Trader Rating: (1) Feedback Score: 1 reviews	it would trully depend on the pricing and options for conversion harnesses that would get you so business as well

07-30-2010, 04:06 AM	#4
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	I think the average connectoprice could be affordable. You could probably replace all the underhood engine harness plugs for $100 or less. I haven't hatched out pricing yet as it's going to depend on how much I purchase.

09-06-2011, 12:16 AM	#5
raiser Join Date: Sep 2011 Location: uk Age: 62 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	I know this post is over a year old..... but would really like some of these. Have problems with brittle tabs on my Skyline harness connectors - so would be interested in connectors too - if the price was right. ..... or if you have decided not to sell these details of suppliers would be useful.

10-18-2011, 09:21 PM	#6
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	still in talks with a guy who is in a better position than I to acquire these in terms of moqs. Any connectors in particular?

11-02-2011, 08:18 PM	#7
nytro2413 Join Date: Jun 2011 Location: flordia Age: 44 Posts: 11 Trader Rating: (1) Feedback Score: 1 reviews	im interested in replacing a bunch of broken connectors on my ka any more info on them?

11-02-2011, 08:45 PM	#8
badboy6686 Zilvia Member Join Date: Jan 2003 Location: Ga Age: 38 Posts: 246 Trader Rating: (5) Feedback Score: 5 reviews	I'm very interested in this, but for VH45DE connectors.