|
|
|||||||
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
|
|
Thread Tools | Display Modes |
03-24-2009, 05:30 PM
|
#1 |
|
Zilvia Member
 |
please help!!! rear z32 calipers
Scored some rear z32 calipers from the junk yard today for 27 bucks but apparently wasn't to lucky because one of the rear calipers i got were missing 3 bolts that hold the half's together.
i guess the person trying to pull them didn't know how to take them off. ive searched through here, and google trying to find a specific torque number for the front and rear bolts holding the halfs together but i only came up with this website. Metric Bolt Specs if you guys could please help me out with that? also if you guys new the tread, pitch and grade of the bolts for the front and rear caliper bolts holding the halfs together 2 that would be great thanx zilvia   |
|
|
| Sponsored Links |
|
03-24-2009, 06:56 PM
|
#2 |
|
Post Whore!
 
Join Date: Dec 2002
Location: Atlanta
Age: 51
Posts: 13,812
Trader Rating: (12)
  Feedback Score: 12 reviews
|
You have seven more of them, is it really that hard to match it up?
M10x1.25x60mm for the rear. The fronts are M10x1.25x100mm in case you need someone to hold you hand again later. Find them zinc plated at the very least, anything else will corrode like hell.
__________________
FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
