17x9+35 up front? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kojiki88 · 05-20-2009, 12:34 PM

Hey guys i don't know if I'm posting this in the right section. If I'm not my bad, if i am let me state out my question. I have an s13 and i want to get some wheels that are 17x9+35 all around, i know the rears will fit just fine. My question is what do i need to do to make the fronts fit. I have gr2's with tein springs. I posted on nico club and have not gotten any responses so I'm trying my luck here. Spacers will be needed but i dont know what size exactly, any help would be much appreciated. Thank you

TravisSW · 05-20-2009, 12:36 PM

Not sure about spacer sizing, but I'm sure the tire/wheel experts will tell you:
-Camber
-Fender Roll
-Fender Pull
-Tire stretching

Something around those lines lol.

kojiki88 · 05-20-2009, 12:38 PM

lol thanks

Drifterxxl180 · 05-20-2009, 12:51 PM

Fender roll... maybe
Fender pull... Not needed
Camber... -1.5 to -2.5
Tires... 215's or 225's

Use slip on spacers about 10-15mm will do and extended wheel will be a must
http://zilvia.net/f/chat/129865-whee...tch-flush.html
read above link

LongGrain · 05-20-2009, 12:53 PM

15mm spacer SHOULD make the fronts fit. but thats with coils. so you might need to go bigger.

J90lude · 05-22-2009, 04:37 AM

Damn!! I always thought you just needed to get a camber kit and that's all. I'm such a noob ha

*fliprayzin240sx* · 05-22-2009, 11:09 PM

Quote:

Originally Posted by J90lude

Damn!! I always thought you just needed to get a camber kit and that's all. I'm such a noob ha

What the fuck does a camber kit gotta do with WHEEL FITMENT?!?!

Anyways, back to the OP, 9J +35 offset, the wheel will hit the front strut. Get atleast 15mm spacers (kicking it down to +20) to look decent. Closer it is to +0 offset, the more aggressive itll look.

But Im not a big fan of spacers that big. My advice to you is sell the rims, save the money you'd spend on spacers and buy rims that wont need any spacers. Hell, I can get you some 18x9 +20 BBS...

05-20-2009, 12:34 PM	#1
kojiki88 Zilvia Member Join Date: May 2009 Location: New Mexico Age: 37 Posts: 245 Trader Rating: (4) Feedback Score: 4 reviews	17x9+35 up front? Hey guys i don't know if I'm posting this in the right section. If I'm not my bad, if i am let me state out my question. I have an s13 and i want to get some wheels that are 17x9+35 all around, i know the rears will fit just fine. My question is what do i need to do to make the fronts fit. I have gr2's with tein springs. I posted on nico club and have not gotten any responses so I'm trying my luck here. Spacers will be needed but i dont know what size exactly, any help would be much appreciated. Thank you

05-20-2009, 12:36 PM	#2
TravisSW Nissanaholic! Join Date: Nov 2006 Location: Orange County, CA Age: 40 Posts: 2,071 Trader Rating: (9) Feedback Score: 9 reviews	Not sure about spacer sizing, but I'm sure the tire/wheel experts will tell you: -Camber -Fender Roll -Fender Pull -Tire stretching Something around those lines lol. __________________ 1986 Porsche 944 Turbo (951) 1995 Nissan 240sx (S14) Miss ya.

05-22-2009, 04:37 AM	#6
J90lude Zilvia Junkie Join Date: May 2008 Location: MD-VA/DC area Age: 37 Posts: 384 Trader Rating: (0) Feedback Score: 0 reviews	Damn!! I always thought you just needed to get a camber kit and that's all. I'm such a noob ha __________________ "Drive it like you running from the cops"

05-20-2009, 12:38 PM	#3
kojiki88 Zilvia Member Join Date: May 2009 Location: New Mexico Age: 37 Posts: 245 Trader Rating: (4) Feedback Score: 4 reviews	lol thanks

05-20-2009, 12:51 PM	#4
Drifterxxl180 Zilvia Member Join Date: Mar 2007 Location: Ky Posts: 271 Trader Rating: (7) Feedback Score: 7 reviews	Fender roll... maybe Fender pull... Not needed Camber... -1.5 to -2.5 Tires... 215's or 225's Use slip on spacers about 10-15mm will do and extended wheel will be a must http://zilvia.net/f/chat/129865-whee...tch-flush.html read above link

05-20-2009, 12:53 PM	#5
LongGrain Post Whore! Join Date: Sep 2006 Location: Midwest Posts: 2,741 Trader Rating: (5) Feedback Score: 5 reviews	15mm spacer SHOULD make the fronts fit. but thats with coils. so you might need to go bigger.