![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
Join Date: Oct 2007
Location: Pharr, Tx
Age: 40
Posts: 87
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
Tranny noise only when cold....
Set up is...
Sr20det redtop stock trans w/clutchmaster 6 puck stage 3 (new) 12light flywheel (resurfaced) New TOB New master cylinder and New slave cylinder 75w-90 synthetic trans fluid Sorry the another question like this but i searched and searched but couldn't find something with my problems. When i turn on the car in the morning and engage the clutch after a few seconds a whirling/grinding noise will start. It stops when i disengage the clutch. Gears go in smoothly even when the grinding is occuring. It will keep doing this until the car is warm. Once it's warm it will NOT happen again. Also 4th will grind EVERY now and then and 5th will grind 50% of the time ever so slightly during daily driving. I have adjusted the clutch pedal inwards and outwards. BLED AND BLED AND BLED!!! Changed master and slaves several times. Pedal has great feel and has been felt by other sr owners in my town and they all say it feels great. NO SLIPPING. Pulls great. Any ideas???? Please no flaming i am not in the mood. Already apoligized in advance. Many thank you's to anyone that attempts to help.
__________________
|
![]() |
![]() |
Sponsored Links |
![]() |
#3 |
Zilvia Member
![]() Join Date: Aug 2009
Location: Sacramento
Age: 34
Posts: 181
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
i had that on my 95 maxima. when its cold, it grinded in 1st, 2nd, and went into 3rd roughly. not sure what it was, but i put in syncromesh oil, and it solved it.
|
![]() |
![]() |
![]() |
#4 |
Post Whore!
![]() Join Date: Oct 2004
Location: San Francisco, CA
Posts: 6,040
Trader Rating: (13)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 13 reviews
|
Yes you are right.... Amsoil remember its the one for tranmissions and transaxle, there is a thread inthe chat section about all the oils.
__________________
![]() |
![]() |
![]() |
![]() |
#7 | |
Zilvia Junkie
![]() |
Quote:
throw out bearing is your most likely problem also sounds like you could use syncros in 4th and 5th |
|
![]() |
![]() |
![]() |
#9 | |
Nissanaholic!
![]() |
amsoil sucks cold as well. it needs to warm up first
__________________
Quote:
![]() |
|
![]() |
![]() |
![]() |
#11 | |
Nissanaholic!
![]() |
i use amsoil right now in my coupe. just let it warm up. i love it though
__________________
Quote:
![]() |
|
![]() |
![]() |
![]() |
#13 |
Zilvia FREAK!
![]() Join Date: Jun 2007
Location: B.C., Canada
Posts: 1,023
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
Redline MT-90 GL4 isn't the best in the cold...but it warms up quick enough. I heard worse things about shockproof though.
__________________
"I'm a rage-aholic, I just can't live with rage-ahol!!!" |
![]() |
![]() |
![]() |
#15 |
Zilvia FREAK!
![]() Join Date: Jun 2007
Location: B.C., Canada
Posts: 1,023
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
I have a friend using RP in his KA-T, and he has no problems...but all I hear is bad things from this forum.
__________________
"I'm a rage-aholic, I just can't live with rage-ahol!!!" |
![]() |
![]() |
![]() |
#19 |
Zilvia FREAK!
![]() |
Make sure it's GL4 and not GL5 or your synchros may go. Bought some qts from local amsoil store and they gave me GL5 even though I asked for GL4. You gotta make sure yourself because some of 'em don't know what they're selling.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|