KA24Det s14 won't start/run

[gmember240]

my 240 won't start. setup is:
-t25 turbo
-3" straightpipe exhaust
-ebay fmic
-n60 maf
-370cc injectors
-enthalpy tuned ECU for the setup (w/ s13-s14 ecu conversion harness)
-EGR removed
-Greddy RS BOV
-battery relocated to trunk
-currently a blow-through setup

I finished the turbo install about 2 weeks ago before i left for school and I just got the enthalpy tuned ECU in today. Installed the enthalpy ECU and attempted to start it up. It cranks fine, jus doesn't start. With the stock ECU I was able to get the car to start after giving it gas but it ran extremely rich. I put in the new ECU today and installed the gauges and won't start. I have no vacuum leaks that I am aware of. Everything seems to be in correct order, I can't figure out why the car won't start. Any help is appreciated. Please don't spam up this thread

thanks guys,
brandon

p.s. the car that i got the enthalpy ECU off of was not setup as a blowthrough. Would it not be able to run if I was running a blow through? Do I need to move the MAF to the intake?

[gmember240]

BUMP msg length

[gmember240]

Close thread