300zx z31 brakes

[drifting240sx]

i was wondering if you could put the rotors, brakes, and calipers on a s13. also could i modify anything to make it a 5 lug on my s13 from the z31. also anything elses that would go int to a s13 from a z31. please help me out. i want to know.

[Kid Zelda]

No... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[Rick-95ZE]

Originally posted by Kid Zelda
No... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=''>

My friend has a Z31, and he said the he can put the Z32 brakes,rotors,Ect.. on his z31, cause its is considerd an upgrade for the z31.. now i have been told on this forums that the z32 stuff will fit on a s13, so why couldn't you put the z31 stuff on

[Rick-95ZE]

I'm going to try anyway,cause he is giving me anything it want off his z31 Free, and I don't feel like paying $500 for the s14 wheel hubs.. just so I wont have to sell my New 18X8 5 luge wheels.... Or someone stop me if someone has actually tried, and Failed already......

[Rick-95ZE]

Originally posted by Rick-95ZE
My friend has a Z31, and he said the he can put the Z32 brakes,rotors,Ect.. on his z31, cause its is considerd an upgrade for the z31.. now i have been told on this forums that the z32 stuff will fit on a s13, so why couldn't you put the z31 stuff on

Or could I just use the HUBS??? not the spindals

[AKADriver]

The Z32 swap on the older cars requires a .170" spacer on the caliper, as the Z31 spindle mounts the caliper .170" further outboard normally. The Z31 calipers will not work correctly on an S13/14 for this reason (since the calipers will want to sit inboard of where they're supposed to go).

Furthermore, the Z31 hubs and spindles will NOT WORK AT ALL

Sell that stuff to an S12 owner, they might find a use for it. It has no place on an S13/14. It won't work. Don't bother.

[Rick-95ZE]

Originally posted by AKADriver
The Z32 swap on the older cars requires a .170" spacer on the caliper, as the Z31 spindle mounts the caliper .170" further outboard normally. The Z31 calipers will not work correctly on an S13/14 for this reason (since the calipers will want to sit inboard of where they're supposed to go).

Furthermore, the Z31 hubs and spindles will NOT WORK AT ALL

Sell that stuff to an S12 owner, they might find a use for it. It has no place on an S13/14. It won't work. Don't bother.

So I take it the just useing the Z31 (hubs only), wouldn't work ,because it would cause the rotor not to line up with the caliper
Right??? I guess my question should have been can you Put the Z31 Hubs on the s13 spindals, and use the s13 caliper, and the Z31 rotor any other rotor???

[AKADriver]

the Z31 hub won't fit in the S13 spindle.

the Z31 spindle won't work in the S13 chassis.

the Z31 caliper won't fit properly on the S13 spindle.

the Z31 rotor won't fit properly on the S13 hubs.

[Rick-95ZE]

Originally posted by AKADriver
the Z31 hub won't fit in the S13 spindle.

the Z31 spindle won't work in the S13 chassis.

the Z31 caliper won't fit properly on the S13 spindle.

the Z31 rotor won't fit properly on the S13 hubs.

Alright, Alright never mind my annoying Pm then, I realy do appreciate your patience with my questions. I know they seemed a little redundant. I have always had a hard time with yes or no answers , I always want to know WHY ,, LOL I just realy don't want to spend any $$ just to get my NEW rims to fit.....