SR tranny sensor question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rican_nick · 05-27-2003, 02:11 PM

i am a noob to posting on this forum and not actually using it as a resource... i have searched and came up with good info but not anything regarding my particular dilemna.. any help would be greatly appreciated.
ok guys i have a 91 240sx and a 98 180sx sr20det.. my question is i have swapped in the ka speed sensor being that i have a mph gauge cluster, it slipped in fine, but when i went to wire it up i see that the ka does not "plug" into the sr lower tranny harness meaning that i would have to splice the wires.. this is my question on the ka sensor the wires are just a solid green and black on the sr lower harness the wires are yellow and yellow/blue stripe.... does anyone know which wire would splice into which..

thanks,

Nick

Jim96SC2 · 05-27-2003, 02:15 PM

Mine went right in... are you on the right wire?

rican_nick · 05-27-2003, 02:20 PM

yup i am sure that it is the correct wire// now on my old sr (redtop) the plug was exactly the same.. wires same color and the ka sensor plugged right into the harness... now on the s13 blacktop the sensor first of all looked different.. and the wiring is also different.. ont he blacktop the harness plugs right into the back of the sensor unlike the ka where you can unclip it up a bout 12" from the sensor.

thanks for your help

rican_nick · 05-30-2003, 03:05 PM

for anyone looking for a fix to this. this is what i did i used the ka tranny harness and sensors i replaced 3 sensors on the sr tranny one them being the speed sensor and i just used the ka lower harness which also just plugged in. i hope this works

05-27-2003, 02:11 PM	#1
rican_nick Zilvia FREAK! Join Date: May 2003 Location: Augusta, GA Age: 42 Posts: 1,204 Trader Rating: (0) Feedback Score: 0 reviews	SR tranny sensor question i am a noob to posting on this forum and not actually using it as a resource... i have searched and came up with good info but not anything regarding my particular dilemna.. any help would be greatly appreciated. ok guys i have a 91 240sx and a 98 180sx sr20det.. my question is i have swapped in the ka speed sensor being that i have a mph gauge cluster, it slipped in fine, but when i went to wire it up i see that the ka does not "plug" into the sr lower tranny harness meaning that i would have to splice the wires.. this is my question on the ka sensor the wires are just a solid green and black on the sr lower harness the wires are yellow and yellow/blue stripe.... does anyone know which wire would splice into which.. thanks, Nick

05-27-2003, 02:15 PM	#2
Jim96SC2 Zilvia Junkie Join Date: Apr 2002 Location: Long Island, NY Age: 43 Posts: 405 Trader Rating: (0) Feedback Score: 0 reviews	Mine went right in... are you on the right wire? __________________ Swap DONE: 40K Redtop, Greddy Turbo extension, Greddy DP, Greddy V-SPL FMIC, Greddy Hotpipe, HKS SSQV, Koyo Radiator, Toda Ultralight FW, Spec Stage 2 Clutch, ATS 2-way Diff., Rice-Boy Red Air Filter.

05-27-2003, 02:20 PM	#3
rican_nick Zilvia FREAK! Join Date: May 2003 Location: Augusta, GA Age: 42 Posts: 1,204 Trader Rating: (0) Feedback Score: 0 reviews	yup i am sure that it is the correct wire// now on my old sr (redtop) the plug was exactly the same.. wires same color and the ka sensor plugged right into the harness... now on the s13 blacktop the sensor first of all looked different.. and the wiring is also different.. ont he blacktop the harness plugs right into the back of the sensor unlike the ka where you can unclip it up a bout 12" from the sensor. thanks for your help

05-30-2003, 03:05 PM	#4
rican_nick Zilvia FREAK! Join Date: May 2003 Location: Augusta, GA Age: 42 Posts: 1,204 Trader Rating: (0) Feedback Score: 0 reviews	for anyone looking for a fix to this. this is what i did i used the ka tranny harness and sensors i replaced 3 sensors on the sr tranny one them being the speed sensor and i just used the ka lower harness which also just plugged in. i hope this works