CA FS: Genuine Trust/GReddy TD04H-19T turbos - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SinGarage · 01-09-2010, 03:05 AM

I have a pair of Trust/GReddy TD04H-19T's with the T25/T28 turbine housing footprint that I had bought to use for a custom RB application. My plans have since changed, and funds don't permit me to finish it in my original intended configuration. These have the 19T compressor, which is the largest wheel of the TD04 family, and will flow over 500cfm...sufficient to support 300+ RWHP with the 8.5cm turbine housing. The nice thing about these turbos is they use the T25/T28 footprint and discharge, IT DOES NOT FIT THE SR20 WITHOUT ADAPTER FLANGE FOR DOWNPIPE. The stock SR20 downpipe is slightly smaller and will need to have a special flange made. But this turbo has more power potential and it is a superior design (25 psi capable). Also, they would be great for a KA24 conversion or a CA18 upgrade.

I had bought these from Japan a while back, when it was around ¥119/$1 USD. I got a pretty good deal at $800 USD each. The retail cost is ¥130,000 and today the exchange rate is at ¥92.6/$1 USD...that's over $1400.00 USD each!!!

You can see this at the link below...

Code:

http://www.trust-power.com/02turbo/turbo_charger.html

I want these gone

$450 each

RGHilux · 01-10-2010, 12:11 PM

These are brand new and have never been installed or run?

SuperiorS14 · 01-10-2010, 01:34 PM

interested in any trades(sr parts)?

SinGarage · 01-10-2010, 07:21 PM

Quote:

Originally Posted by RGHilux

These are brand new and have never been installed or run?

Brand new not even installed yet.

Quote:

Originally Posted by SuperiorS14

interested in any trades(sr parts)?

No SR parts as I have an RB25. Only trades interested in is BOV and suspension parts.

Locals get first dibs unless buyer wants to pay for shipping.

SinGarage · 01-10-2010, 11:18 PM

Just found out right now that these do not fit SR20's without adapter flange to downpipe. Turbo side is slightly bigger than the stock DP. Sorry for the confusion.

SinGarage · 02-17-2010, 04:21 PM

Update = I have sold the running KA and I still have the blown headgasket KA left. I also have the DP (flanges with pipe) that fits these turbos. I'm not sure what car they are for but you can cutoff the flange off of your original DP for your SR and weld this one on to fit. Price is still the same. I will upload pics later this evening for the flange.

01-09-2010, 03:05 AM	#1
SinGarage Zilvia Addict Join Date: Sep 2009 Location: 818 SoCal Age: 48 Posts: 674 Trader Rating: (11) Feedback Score: 11 reviews	FS: Genuine Trust/GReddy TD04H-19T turbos I have a pair of Trust/GReddy TD04H-19T's with the T25/T28 turbine housing footprint that I had bought to use for a custom RB application. My plans have since changed, and funds don't permit me to finish it in my original intended configuration. These have the 19T compressor, which is the largest wheel of the TD04 family, and will flow over 500cfm...sufficient to support 300+ RWHP with the 8.5cm turbine housing. The nice thing about these turbos is they use the T25/T28 footprint and discharge, IT DOES NOT FIT THE SR20 WITHOUT ADAPTER FLANGE FOR DOWNPIPE. The stock SR20 downpipe is slightly smaller and will need to have a special flange made. But this turbo has more power potential and it is a superior design (25 psi capable). Also, they would be great for a KA24 conversion or a CA18 upgrade. I had bought these from Japan a while back, when it was around ¥119/$1 USD. I got a pretty good deal at $800 USD each. The retail cost is ¥130,000 and today the exchange rate is at ¥92.6/$1 USD...that's over $1400.00 USD each!!! You can see this at the link below... Code: http://www.trust-power.com/02turbo/turbo_charger.html I want these gone $450 each Last edited by SinGarage; 01-10-2010 at 11:12 PM..

01-10-2010, 12:11 PM	#2
RGHilux Join Date: Jan 2010 Location: L.A. Age: 47 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	These are brand new and have never been installed or run?

01-10-2010, 01:34 PM	#3
SuperiorS14 Zilvia FREAK! Join Date: Feb 2007 Location: S.G.V. Age: 40 Posts: 1,138 Trader Rating: (20) Feedback Score: 20 reviews	interested in any trades(sr parts)?

01-10-2010, 11:18 PM	#5
SinGarage Zilvia Addict Join Date: Sep 2009 Location: 818 SoCal Age: 48 Posts: 674 Trader Rating: (11) Feedback Score: 11 reviews	Just found out right now that these do not fit SR20's without adapter flange to downpipe. Turbo side is slightly bigger than the stock DP. Sorry for the confusion.

02-17-2010, 04:21 PM	#6
SinGarage Zilvia Addict Join Date: Sep 2009 Location: 818 SoCal Age: 48 Posts: 674 Trader Rating: (11) Feedback Score: 11 reviews	Update = I have sold the running KA and I still have the blown headgasket KA left. I also have the DP (flanges with pipe) that fits these turbos. I'm not sure what car they are for but you can cutoff the flange off of your original DP for your SR and weld this one on to fit. Price is still the same. I will upload pics later this evening for the flange.